Regardless whether it’s for your own safety, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are always functional is fundamental. In reality, bulbs are wearing auto parts that will surely burn out over time and therefore need to be changed. You’re most likely on the website because one of your parking lights is burnt out and you’re wondering how to change your Audi R8’s license plate bulb, we’ve written this document to help you do it by yourself and not have to go to your technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Audi R8.
How to replace the license plate bulb on your Audi R8 coming from the outside
This method is the quickest of the two, actually, for this one you will just have to take away the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will spend some time on in the second section of this article content to explain the approach.
So let’s start with swapping the number plate bulb by going through the outside of your Audi R8. Regardless whether it’s the front or the back of your vehicle the operation will be identical.
Here are a few simple guidelines to stick to to execute this maintenance:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this goal (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Audi R8
- Use your screwdriver or knife to remove the bulb from its spot, if you are scared of breaking a thing, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to confirm the success of the task.
.
How to replace the number plate bulb on your Audi R8 without outside access
Second section of our item, swap this license plate bulb on your Audi R8 without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Audi R8
To replace the one on the front plate, nothing could be much easier, you will have to put yourself under the vehicle (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases kept by two soft plastic tabs by pressing on both at the same time, then right after you have your license plate bulb block in hand, Remove the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to apply too much force or you will break the plastic cover), and you will simply have to take away the burnt-out license plate bulb and swap it with the new , then test out and reassemble the whole thing.
How to replace the rear license plate bulb on my Audi R8
Finally last possibility, you must replace the bulb on the backplate of your Audi R8, but you simply cannot open the cover from the outside of your vehicle. In this instance, here is the solution to execute this operation:
- Disconnect the battery from your Audi R8
- Locate the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Audi R8, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main ways for swapping license plate bulbs on your car, be aware that on some models the technique may be a bit different but you should be able to accomplish it following the explanation of this article. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Audi R8. If you desire to change other bulbs like the position light bulbs on your Audi R8 or the low beam bulbs on Audi R8, don’t hesitate to consult our content articles which demonstrate you the procedure to follow.
In the event that you have any additional questions about the Audi R8, do not hesitate to consult our Audi R8 category.
