It doesn’t matter if it’s for your own personal security, for roadworthiness tests or to avoid a fine, being certain your headlamp bulbs are always working is fundamental. In fact, bulbs are wearing parts that will obviously burn out after awhile and therefore need to be swapped out. You’re likely on this website because one of your parking lights is burnt out and you’re questioning how to change your Audi A7’s license plate bulb, we’ve made this article to help you do it by yourself and not have to go to your auto technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Audi A7.
How to change the license plate bulb on your Audi A7 coming from the outside
This method is the quickest of the two, in truth, for this one you will just have to take out the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will take a moment on in the second section of this content page to teach you the method.
So let’s start with changing the number plate bulb by going through the outside of your Audi A7. It doesn’t matter if it’s the front or the back of your car the method will be the same.
Here are a few simple actions to follow to conduct this service:
- With the engine turned off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this intent (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Audi A7
- Use your screwdriver or knife to remove the bulb from its place, if you are scared of breaking something, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to confirm the successfulness of the procedure.
.
How to replace the number plate bulb on your Audi A7 without outside access
Second section of our item, change this license plate bulb on your Audi A7 without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Audi A7
To change the one on the front plate, nothing could be less hard, you will have to put yourself under the car (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly kept by two soft plastic tabs by pressing on both at once, then once you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to exert too much pressure otherwise you will break the plastic cover), and you will simply have to take out the burnt-out license plate bulb and swap it with the new , then verify and reassemble the whole thing.
How to change the rear license plate bulb on my Audi A7
Finally last possibility, you must change the bulb on the backplate of your Audi A7, but you simply cannot open the cover from the outside of your car. In such a case, here is the tactic to accomplish this operation:
- Disconnect the battery from your Audi A7
- Locate the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Audi A7, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main solutions for changing license plate bulbs on your car, take notice that on some models the methodology may be a bit different but you should be able to do it following the explanation of this article. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Audi A7. If you wish to change other bulbs like the position light bulbs on your Audi A7 or the low beam bulbs on Audi A7, don’t be reluctant to read our content articles which demonstrate you the procedure to follow.
If you wish more guides on the Audi A7, go to our Audi A7 category.
