Whether it’s for your own security, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are in every case working is really important. In fact, bulbs are wearing units that will surely burn out as time passes and as a result need to be replaced. You’re likely on this website because one of your parking lights is burnt out and you’re struggling with how to change your Audi A2’s license plate bulb, we’ve made this article content to help you do it all on your own and not have to go to your auto mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Audi A2.
How to change the license plate bulb on your Audi A2 throughout the outside
This option is the simplest of the two, in truth, for this one you will just need to take away the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate some time on in the second part of this article content to explain the way.
So let’s start with replacing the number plate bulb by going through the outside of your Audi A2. Whether it’s the front or the back of your car the operation will be the same.
Here are a few simple guidelines to stick to to conduct this routine service:
- With the engine turned off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this intent (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Audi A2
- Use your screwdriver or knife to eject the bulb from its placement, if you are worried of damaging anything, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to validate the success of the operation.
.
How to replace the number plate bulb on your Audi A2 without outside access
Second part of our article, swap this license plate bulb on your Audi A2 without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Audi A2
To change the one on the front plate, nothing could be much easier, you will have to position yourself under the car (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases held by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take away the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to apply too much pressure otherwise you will break the plastic cover), and you will only have to take away the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.
How to change the rear license plate bulb on my Audi A2
Finally last solution, you must change the bulb on the backplate of your Audi A2, but you simply cannot open the cover from the outside of your car. In this instance, here is the technique to perform this task:
- Unplug the battery from your Audi A2
- Locate the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Audi A2, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main approaches for replacing license plate bulbs on your car, take note that on some models the method may be a bit different but you should be able to do it following the explanation of this document. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Audi A2. If you need to change other bulbs like the position light bulbs on your Audi A2 or the low beam bulbs on Audi A2, don’t hesitate to read our content articles which describe you the process to follow.
If you wish more tutorials on the Audi A2, go to our Audi A2 category.
