Whether it’s for your personal security, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are in every case effective is really important. In reality, bulbs are wearing parts that will inevitably burn out as time passes and as a result need to be swapped out. You’re likely on this website because one of your parking lights is burnt out and you’re wanting to know how to change your Alfa Romeo Giulia’s license plate bulb, we’ve written this content to help you do it all on your own and not have to go to your auto technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Alfa Romeo Giulia.

change-license-plate-bulb-alfa-romeo-giulia

How to replace the license plate bulb on your Alfa Romeo Giulia through the outside

This process is the fastest of the two, in fact, for this one you will simply have to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will spend a moment on in the second section of this document to demonstrate the way.
So let’s begin with replacing the number plate bulb by going through the outside of your Alfa Romeo Giulia. Whether it’s the front or the back of your automobile the method will be similar.
Here are a few simple steps to stick to to perform this maintenance tasks:

  • With the engine off, unplug the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this intent (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Alfa Romeo Giulia
  • .

  • Use your screwdriver or knife to eject the bulb from its spot, if you are scared of breaking something, you can as well do it with your fingers.
  • Finally, position the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and test the light to confirm the achievement of the procedure.

How to change the number plate bulb on your Alfa Romeo Giulia without outside access

Second section of our article, swap this license plate bulb on your Alfa Romeo Giulia without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).

How to replace the front license plate bulb on my Alfa Romeo Giulia

To replace the one on the front plate, nothing could be less difficult, you will have to position yourself under the automobile (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly held by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to exert too much pressure otherwise you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and swap it with the new , then check and reassemble the whole thing.

How to replace the rear license plate bulb on my Alfa Romeo Giulia

Finally last solution, you must replace the bulb on the backplate of your Alfa Romeo Giulia, but you are not able to open the cover from the outside of your automobile. In this instance, here is the tactic to accomplish this task:

  • Disconnect the battery from your Alfa Romeo Giulia
  • Locate the position of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
  • Once established, before removing the bulb holders, unplug the holders for less difficult access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Alfa Romeo Giulia, test it and reassemble it, paying attention to the clips on the trunk liner

.
There you have it, you have found out the main ways for replacing license plate bulbs on your car, take note that on some models the methodology may be a bit different but you should be able to realize it following the outline of this content page. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Alfa Romeo Giulia. If you need to change other bulbs like the position light bulbs on your Alfa Romeo Giulia or the low beam bulbs on Alfa Romeo Giulia, don’t be reluctant to read our content articles which demonstrate you the process to follow.

If you need more tutorials on the Alfa Romeo Giulia, go to our Alfa Romeo Giulia category.