Regardless it’s for your personal security, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are all the time effective is really important. In reality, bulbs are wearing units that will inevitably burn out after some time and therefore need to be changed. You’re likely on this site because one of your parking lights is burnt out and you’re questioning how to change your Alfa Romeo 159’s license plate bulb, we’ve created this article content to help you do it without any help and not have to go to your technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Alfa Romeo 159.
How to replace the license plate bulb on your Alfa Romeo 159 through the outside
This technique is the least difficult of the two, in fact, for this one you will simply need to remove the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will take some time on in the second part of this document to describe the method.
So let’s begin with replacing the number plate bulb by going through the outside of your Alfa Romeo 159. Regardless it’s the front or the back of your car the operation will be identical.
Here are a few simple actions to follow to execute this routine service:
- With the engine turned off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this purpose (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Alfa Romeo 159
- Use your screwdriver or knife to remove the bulb from its placement, in the event that you are worried of damaging something, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to confirm the achievement of the procedure.
.
How to change the number plate bulb on your Alfa Romeo 159 without outside access
Second part of our document, swap this license plate bulb on your Alfa Romeo 159 without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Alfa Romeo 159
To replace the one on the front plate, nothing could be simpler, you will have to position yourself under the car (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually held by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Take away the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to exert too much pressure or you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and swap it with the new , then check and reassemble the whole thing.
How to replace the rear license plate bulb on my Alfa Romeo 159
Finally last solution, you must replace the bulb on the backplate of your Alfa Romeo 159, but you are not able to open the cover from the outside of your car. In this case, here is the method to execute this operation:
- Disconnect the battery from your Alfa Romeo 159
- Locate the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Alfa Romeo 159, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main methods for replacing license plate bulbs on your car, be aware that on some models the technique may be a bit different but you should be able to do it following the explanation of this document. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Alfa Romeo 159. If you need to change other bulbs like the position light bulbs on your Alfa Romeo 159 or the low beam bulbs on Alfa Romeo 159, don’t be reluctant to consult our articles which demonstrate you the operation to follow.
Whenever you have any additional questions about the Alfa Romeo 159, do not hesitate to consult our Alfa Romeo 159 category.
