Whether it’s for your specific security, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are all the time functioning is really important. In reality, bulbs are wearing auto parts that will inevitably burn out as time passes and as a result need to be replaced. You’re most certainly on this site because one of your parking lights is burnt out and you’re worried about how to change your Acura TLX’s license plate bulb, we’ve created this document to help you do it on your own and not have to go to your auto mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Acura TLX.
How to swap the license plate bulb on your Acura TLX coming from the outside
This option is the simplest of the two, in fact, for this one you will just need to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate a moment on in the second section of this article content to teach you the way.
So let’s begin with changing the number plate bulb by going through the outside of your Acura TLX. Whether it’s the front or the back of your automobile the operation will be the same.
Here are a few simple actions to follow to execute this maintenance:
- With the engine off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this purpose (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Acura TLX
- Use your screwdriver or knife to eject the bulb from its placement, in the event that you are worried of breaking something, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and check the light to validate the successfulness of the operation.
.
How to replace the number plate bulb on your Acura TLX without outside access
Second section of our content page, replace this license plate bulb on your Acura TLX without external access. In most cases you will be able to access it, however some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Acura TLX
To swap the one on the front plate, nothing could be much easier, you will have to position yourself under the automobile (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally kept by two soft plastic tabs by pressing on both at the same time, then right after you have your license plate bulb block in hand, Take out the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to put in too much pressure or you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and swap it with the new , then test out and reassemble the whole thing.
How to swap the rear license plate bulb on my Acura TLX
Finally last solution, you must swap the bulb on the backplate of your Acura TLX, but you are not able to open the cover from the outside of your automobile. In this case, here is the solution to accomplish this task:
- Disconnect the battery from your Acura TLX
- Identify the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, disconnect the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Acura TLX, check it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main techniques for changing license plate bulbs on your car, take notice that on some models the technique may be a bit different but you should be able to accomplish it following the outline of this article content. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Acura TLX. If you need to change other bulbs like the position light bulbs on your Acura TLX or the low beam bulbs on Acura TLX, don’t be reluctant to read our content articles which describe you the process to follow.
In the event that you have any further questions about the Acura TLX, do not hesitate to consult our Acura TLX category.
