Some maintenance actions such as changing the engine oil might seem evident and important, although others such as changing the gearbox oil from its Nissan Cube may appear to be less natural. However, produce no mistake, changing the gearbox is just as necessary as changing the engine oil. This content page will describe the purpose of the gearbox oil, then, why it is important to change the gearbox of your Nissan Cube, and at last, how to change the gearbox oil of a Nissan Cube .
Role of gearbox oil on a Nissan Cube
So we start our content page with the purpose of gearbox oil on a Nissan Cube. The objective of this short introduction is to produce you understand the benefit of this fluid which assures the good functioning of your car. The gearbox of your car has the objective to demultiply the power transmitted by the engine and send it back to your wheels . It is done up of pinions and gears that will allow the wheels to rotate at different speeds depending on the curves and the gear engaged. It will operate with the help of an axle and a differential. All these parts will need to be highly lubricate to function correctly, limit friction and tolerate the high temperatures produced by the engine and friction. Your transmission oil has a high viscosity and will prevent the formation of filings or gear breakage, so it is essential to the proper performing of the gearbox.
Why replacing the gearbox oil from a Nissan Cube?
Now we’ll see what’s the point of draining the gearbox oil of your Nissan Cube?
Benefit of gearbox oil changing Nissan Cube
There are several concerns to change the gearbox of your car repeatedly, we will list them and outline them below:
- After a while, the oil will lose its viscosity because of friction and temperature rise, which will result in less lubrication of the gears and pinions and therefore risk to break some of them.
- Same as viscosity, time and temperature rise will decrease the oil resistance to the engine temperature, So it will fluidize much more easily when the engine heats up, which is not good for your gearbox.
- Accumulation of metallic residues: Finally, even if you constantly have a quality oil, a gearbox is an component that wears out and generates iron filings with friction, the oil will pick them up and if it gathers up too much these residues can get into gears and break them.
When to do the gearbox oil change on a Nissan Cube?
If you want to do an automatic or manual gearbox oil change on Nissan Cube or strong> the procedure is not similar, however, dealers do not give mileage suggestions to change the oil in your gearbox, however when you do an intervention on the gearbox it is advisable to change it, in any other case here are the reasons to produce you think about doing this oil change.
Oil change for manual gearbox Nissan Cube
- Gears are jumping: you are most likely missing oil and you might have a gearbox oil leak, please see our article on gearbox leaks on Nissan Cube for more information.
- The gearbox cracks when you change gears: The oil has certainly lost viscosity and is too fluid, so the gears get stuck.
- Difficulty to shift gears: Same problem as just before, the oil is obviously too fluid.
Automatic gearbox oil change
- A slow start from the neutral position to the first one: generally a viscosity problem.
- Difficulty or even impossibility to shift gears: Lack of oil
.
How to change gearbox oil of a Nissan Cube?
Finally, to end this article, we will describe you how to empty the gearbox oil of your Nissan Cube , it’s less difficult than you might believe, here are the few guidelines to follow to do it correctly:
- Heat your Nissan Cube for about 10 minutes to get a fluid oil, place it flat on 4 stands.
- Install a drain pan under the drain plug, open it, and clean it well because it will most likely collect filings.
- Let all the oil run out until it’s all gone.
- Replace and tighten the cap, then fill with a syringe through the filler cap with the manufacturer’s suggested dose
To find more tips on the Nissan Cube, take a look at the Nissan Cube category.
