It doesn’t matter if for your own security, for roadworthiness testing or to avoid a fine, being sure your turn signal bulbs are always operational is very important. In fact, bulbs are wearing parts that will surely burn out after awhile and as a result need to be replaced. You’re most likely in this article because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Volkswagen Polo 6, we’ve created this article content to help you do it without help and not have to go to your technician. In a first step, we will take a look at the checking a burnt-out front turn signal bulb on your Volkswagen Polo 6 and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-volkswagen-polo-6

How to discover if the front turn signal bulb on your Volkswagen Polo 6 is burnt out or needs to be swapped out?

When you drive your motor vehicle you don’t constantly have the opportunity to verify all the security features of your Volkswagen Polo 6. In fact, you are nearly always in a rush and tend to get into your motor vehicle, make your trip and put it down instantly without taking the time to do an regular check-up. It is as a result essential to take the time to in some cases verify the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Volkswagen Polo 6, but that you didn’t detect it. Here are the two simple techniques to verify if a front turn signal is burnt out or if you need to replace it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to verify that they are functioning.
  • By hearing to the sound of your blinkers. In fact, there is an audible sign on each car that warns you of a front turn indicator bulb burnt out on your Volkswagen Polo 6, you will identify that the time between each “click” is much shorter, this denotes that you will have to change the front turn signal bulb or before. It’s up to you to verify and check out which one is burnt out by a visual verify as on the first solution shown above.

You may have an additional bulb to replace, like the one of your low beam or your position lights, don’t be reluctant to consult our content articles to help you to carry out this substitution.

Changing the front turn signal bulb on your Volkswagen Polo 6

Now let’s go to the most essential step of this article content, how to change the front turn signal bulb of your Volkswagen Polo 6? You should be aware that this task is quite simple, you will need to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Volkswagen Polo 6. If it is a bulb on your rear turn signal, see our dedicated article content. Nevertheless, here are the details of the actions to stick to in order to accomplish this act properly dependant on the technique you want to choose.

Change front turn signal bulb on your Volkswagen Polo 6 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Volkswagen Polo 6 by the new one (make sure to verify if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb is effective.

    • Change the front turn signal bulb of your Volkswagen Polo 6 through the wheel arch:

    This process is specifically practical when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take off the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same simple steps as on the part previously seen.

    Replace the front turn signal bulb of your Volkswagen Polo 6 through the bumper:

    On some years or finishes, according to the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full technique, we will detail them right now:

    • Put your Volkswagen Polo 6 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Beware with the plastic staples which can be fragile.
    • Take out your headlight block and replace the front turn indicator bulb of your Volkswagen Polo 6 following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    If perhaps you have any additional questions about the Volkswagen Polo 6, do not hesitate to consult our Volkswagen Polo 6 category.