It doesn’t matter if for your own safety, for roadworthiness testing or to avoid a fine, ensuring that your turn signal bulbs are always functional is necessary. In fact, bulbs are wearing parts that will undoubtedly burn out with time and as a result need to be swapped out. You’re most likely in this article because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Volkswagen Lupo, we’ve made this article to help you do it all on your own and not have to go to your auto technician. In a first step, we will look at controling a burnt-out front turn signal bulb on your Volkswagen Lupo and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-volkswagen-lupo

How to know if the front turn signal bulb on your Volkswagen Lupo is burnt out or needs to be replaced?

When you drive your motor vehicle you don’t constantly have the possibility to examine all the safety features of your Volkswagen Lupo. In fact, you are frequently in a rush and tend to get into your motor vehicle, make your journey and put it down immediately without taking the time to do an occasional check-up. It is consequently crucial to take the time to sometimes examine the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Volkswagen Lupo, but that you didn’t become aware of it. Here are the two simple techniques to check if a front turn signal is burnt out or if you need to change it rather quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to check that they are functional.
  • By hearing to the sound of your blinkers. In fact, there is an audible indicator on each car that informs you of a front turn indicator bulb burnt out on your Volkswagen Lupo, you will notice that the time between each “click” is much shorter, this means that you will have to swap the front turn signal bulb or before. It’s up to you to examine and check out which one is burnt out by a visual check as on the first process shown previously.

You may have another bulb to change, like the one of your low beam or your position lights, don’t hesitate to browse our blog posts to help you to accomplish this replacement.

Changing the front turn signal bulb on your Volkswagen Lupo

Now let’s go to the most significant step of this article, how to replace the front turn signal bulb of your Volkswagen Lupo? Take note that this task is really easy, you will require to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Volkswagen Lupo. If it is a bulb on your rear turn signal, see our specific article. Nevertheless, here are the details of the guidelines to follow in order to carry out this action efficiently depending on the solution you desire to adopt.

Change front turn signal bulb on your Volkswagen Lupo through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Volkswagen Lupo by the new one (ensure to examine if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb works.

    • Change the front turn signal bulb of your Volkswagen Lupo through the wheel arch:

    This methodology is especially valuable when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take off the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same steps as on the part previously seen.

    Change the front turn signal bulb of your Volkswagen Lupo through the bumper:

    On some years or finishes, depending on the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will explain them right now:

    • Put your Volkswagen Lupo on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be fragile.
    • Take off your headlight block and change the front turn indicator bulb of your Volkswagen Lupo following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    To discover more tips on the Volkswagen Lupo, take a look at the Volkswagen Lupo category.