Regardless whether for your own security, for roadworthiness testing or to avoid a fine, ensuring your turn signal bulbs are always operational is very important. In fact, bulbs are wearing parts that will obviously burn out after awhile and therefore need to be replaced. You’re quite likely in this article because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Toyota Prius, we’ve created this article to help you do it without help and not have to go to your technician. In a first step, we will have a look at the checking a burnt-out front turn signal bulb on your Toyota Prius and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-toyota-prius

How to know if the front turn signal bulb on your Toyota Prius is burnt out or needs to be changed?

When you drive your car you don’t always have the possibility to check all the security equipments of your Toyota Prius. In fact, you are frequently in a rush and tend to enter into your car, make your trip and put it down right away without taking the time to do an unexpected check-up. It is as a consequence fundamental to take the time to occasionally check the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Toyota Prius, but that you didn’t become aware of it. Here are the two simple ways to examine if a front turn signal is burnt out or if you need to swap it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are functional.
  • By hearing to the sound of your blinkers. In fact, there is an audible sign on each car that warns you of a front turn indicator bulb burnt out on your Toyota Prius, you will identify that the time between each “click” is much shorter, this denotes that you will have to replace the front turn signal bulb or before. It’s up to you to check and make sure which one is burnt out by a visual examine as on the first methodology shown above.

You may have another bulb to swap, like the one of your low beam or your position lights, don’t be reluctant to browse our blog posts to help you to perform this replacing.

Changing the front turn signal bulb on your Toyota Prius

Now let’s go to the most significant step of this article, how to change the front turn signal bulb of your Toyota Prius? Please note that this process is quite simple, you will need to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Toyota Prius. If it is a bulb on your rear turn signal, see our specific article. However, here are the details of the simple steps to stick to in order to accomplish this act efficiently depending on the strategy you want to adopt.

Replace front turn signal bulb on your Toyota Prius through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Toyota Prius by the new one (ensure to check if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb functions.

    • Replace the front turn signal bulb of your Toyota Prius through the wheel arch:

    This procedure is in particular valuable when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same guidelines as on the part previously seen.

    Change the front turn signal bulb of your Toyota Prius through the bumper:

    On some years or finishes, dependant on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will detail them now:

    • Put your Toyota Prius on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Beware with the plastic staples which can be fragile.
    • Take away your headlight block and swap the front turn indicator bulb of your Toyota Prius following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    If you need more guides on the Toyota Prius, go to our Toyota Prius category.