Regardless for your personal security, for roadworthiness testing or to avoid a fine, ensuring that your turn signal bulbs are always working is imperative. Indeed, bulbs are wearing parts that will obviously burn out over the years and therefore need to be replaced. You’re almost certainly in this article because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Toyota C HR, we’ve written and published this article content to help you do it alone and independently and not have to go to your repair shop. In a first step, we will examine controling a burnt-out front turn signal bulb on your Toyota C HR and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-toyota-c-hr

How to discover if the front turn signal bulb on your Toyota C HR is burnt out or needs to be swapped out?

When you drive your car you don’t constantly have the opportunity to examine all the security features of your Toyota C HR. Indeed, you are frequently in a rush and tend to enter into your car, make your journey and put it down right away without taking the time to do an occasional check-up. It is as a result essential to take the time to once in a while examine the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Toyota C HR, but that you didn’t detect it. Here are the two simple solutions to check if a front turn signal is burnt out or if you need to replace it fairly quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to check that they are functional.
  • By listening to the sound of your blinkers. Indeed, there is an audible indicator on each car that warns you of a front turn indicator bulb burnt out on your Toyota C HR, you will identify that the time between each “click” is much shorter, this suggests that you will have to change the front turn signal bulb or before. It’s up to you to examine and check which one is burnt out by a visual check as on the first process shown previously.

You may have an additional bulb to replace, like the one of your low beam or your position lights, don’t be reluctant to browse our articles to help you to do this substitution.

Replacing the front turn signal bulb on your Toyota C HR

Now let’s go to the most significant step of this article content, how to replace the front turn signal bulb of your Toyota C HR? Take note that this task is fairly simple, you will have to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Toyota C HR. If it is a bulb on your rear turn signal, see our dedicated article content. On the other hand, here are the details of the actions to stick to in order to carry out this act efficiently depending on the approach you desire to choose.

Change front turn signal bulb on your Toyota C HR through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Toyota C HR by the new one (make certain to examine if it’s an orange or transparent bulb).
  • Reassemble and check that the new front turn signal bulb works.

    • Change the front turn signal bulb of your Toyota C HR through the wheel arch:

    This tactic is specially practical when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same steps as on the part previously seen.

    Change the front turn signal bulb of your Toyota C HR through the bumper:

    On some years or finishes, according to the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will describe them right now:

    • Put your Toyota C HR on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be careful with the plastic staples which can be breakable.
    • Take away your headlight block and replace the front turn indicator bulb of your Toyota C HR following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    If you wish more tutorials on the Toyota C HR, go to our Toyota C HR category.