It doesn’t matter if for your own security, for roadworthiness testing or to avoid a fine, making sure your turn signal bulbs are always functional is imperative. In reality, bulbs are wearing parts that will predictably burn out after some time and consequently need to be replaced. You’re most certainly here because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Toyota 86, we’ve written this article content to help you do it without hiring somebody and not have to go to your repair shop. In a first step, we will examine the checking a burnt-out front turn signal bulb on your Toyota 86 and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-toyota-86

How to find out if the front turn signal bulb on your Toyota 86 is burnt out or needs to be swapped out?

When you drive your motor vehicle you don’t constantly have the opportunity to examine all the security equipments of your Toyota 86. In reality, you are often times in a hurry and tend to get into your motor vehicle, make your trip and put it down right away without taking the time to do an occasional check-up. It is as a result crucial to take the time to sometimes examine the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Toyota 86, but that you didn’t detect it. Here are the two simple ways to examine if a front turn signal is burnt out or if you need to change it fairly quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are functioning.
  • By listening to the sound of your blinkers. In reality, there is an audible sign on each car that signals you of a front turn indicator bulb burnt out on your Toyota 86, you will recognize that the time between each “click” is much shorter, this suggests that you will have to change the front turn signal bulb or before. It’s up to you to examine and make sure which one is burnt out by a visual examine as on the first procedure shown earlier mentioned.

You may have an additional bulb to change, like the one of your low beam or your position lights, don’t be reluctant to consult our content articles to help you to perform this substitution.

Changing the front turn signal bulb on your Toyota 86

Now let’s go to the most important step of this article content, how to change the front turn signal bulb of your Toyota 86? Take note that this task is fairly simple, you will need to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Toyota 86. If it is a bulb on your rear turn signal, see our special article content. Nevertheless, here are the details of the simple steps to stick to in order to conduct this act correctly dependant on the technique you want to choose.

Replace front turn signal bulb on your Toyota 86 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Toyota 86 by the new one (be sure to examine if it’s an orange or transparent bulb).
  • Reassemble and check that the new front turn signal bulb works.

    • Replace the front turn signal bulb of your Toyota 86 through the wheel arch:

    This process is particularly useful when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take out the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same simple steps as on the part previously seen.

    Change the front turn signal bulb of your Toyota 86 through the bumper:

    On some years or finishes, based on the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full technique, we will explain them right now:

    • Put your Toyota 86 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be mindful with the plastic staples which can be fragile.
    • Remove your headlight block and change the front turn indicator bulb of your Toyota 86 following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    If you have any additional questions about the Toyota 86, do not hesitate to consult our Toyota 86 category.