It doesn’t matter if for your own safety, for roadworthiness testing or to avoid a fine, making sure your turn signal bulbs are always working is imperative. In fact, bulbs are wearing parts that will predictably burn out as time passes and as a result need to be replaced. You’re likely in this article because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Subaru Forester, we’ve created this content to help you do it by yourself and not have to go to your auto mechanic. In a first step, we will look at controling a burnt-out front turn signal bulb on your Subaru Forester and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-subaru-forester

How to find out if the front turn signal bulb on your Subaru Forester is burnt out or needs to be swapped out?

When you drive your vehicle you don’t always have the opportunity to examine all the safety equipments of your Subaru Forester. In fact, you are most likely in a rush and tend to get into your vehicle, make your trip and put it down right away without taking the time to do an unexpected check-up. It is therefore crucial to take the time to once in a while examine the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Subaru Forester, but that you didn’t detect it. Here are the two simple ways to control if a front turn signal is burnt out or if you need to replace it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to control that they are operational.
  • By listening to the sound of your blinkers. In fact, there is an audible indicator on each car that alerts you of a front turn indicator bulb burnt out on your Subaru Forester, you will recognise that the time between each “click” is much closer, this means that you will have to swap the front turn signal bulb or before. It’s up to you to examine and check which one is burnt out by a visual control as on the first process shown above.

You may have another bulb to replace, like the one of your low beam or your position lights, don’t be reluctant to read our articles to help you to carry out this substitution.

Changing the front turn signal bulb on your Subaru Forester

Now let’s go to the most essential step of this content, how to replace the front turn signal bulb of your Subaru Forester? You should be aware that this technique is very simple, you will require to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Subaru Forester. If it is a bulb on your rear turn signal, see our special content. Nevertheless, here are the details of the steps to follow to be able to accomplish this act properly according to the method you want to choose.

Replace front turn signal bulb on your Subaru Forester through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Subaru Forester by the new one (make sure to examine if it’s an orange or transparent bulb).
  • Reassemble and test that the brand-new front turn signal bulb operates.

    • Replace the front turn signal bulb of your Subaru Forester through the wheel arch:

    This methodology is extremely useful when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take away the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same simple steps as on the part previously seen.

    Replace the front turn signal bulb of your Subaru Forester through the bumper:

    On some years or finishes, dependant on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full technique, we will point them right now:

    • Put your Subaru Forester on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Beware with the plastic staples which can be delicate.
    • Take out your headlight block and replace the front turn indicator bulb of your Subaru Forester following the steps seen in the parts seen earlier.
    • Put the whole thing back together again.

    If you need more tutorials on the Subaru Forester, go to our Subaru Forester category.