Whether for your own security, for roadworthiness testing or to avoid a fine, being sure your turn signal bulbs are always functioning is imperative. In reality, bulbs are wearing parts that will predictably burn out with time and therefore need to be replaced. You’re almost certainly on the website because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Skoda Kodiaq, we’ve written this article to help you do it alone and not have to go to your auto mechanic. In a first step, we will take a look at controling a burnt-out front turn signal bulb on your Skoda Kodiaq and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-skoda-kodiq

How to recognise if the front turn signal bulb on your Skoda Kodiaq is burnt out or needs to be swapped out?

When you drive your automobile you don’t constantly have the opportunity to verify all the security features of your Skoda Kodiaq. In reality, you are most likely in a hurry and tend to get into your automobile, make your trip and put it down instantly without taking the time to do an occasional check-up. It is therefore essential to take the time to in some cases verify the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Skoda Kodiaq, but that you didn’t become aware of it. Here are the two simple techniques to verify if a front turn signal is burnt out or if you need to swap it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to verify that they are operational.
  • By listening to the sound of your blinkers. In reality, there is an audible signal on each car that alerts you of a front turn indicator bulb burnt out on your Skoda Kodiaq, you will recognise that the time between each “click” is much closer, this means that you will have to replace the front turn signal bulb or before. It’s up to you to verify and check which one is burnt out by a visual verify as on the first solution shown above.

You may have another bulb to swap, like the one of your low beam or your position lights, don’t hesitate to consult our content articles to help you to do this replacement.

Replacing the front turn signal bulb on your Skoda Kodiaq

Now let’s go to the most significant step of this article, how to change the front turn signal bulb of your Skoda Kodiaq? Please note that this task is quite easy, you will require to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Skoda Kodiaq. If it is a bulb on your rear turn signal, see our specific article. On the other hand, here are the details of the actions to stick to to be able to execute this action accurately according to the solution you wish to choose.

Replace front turn signal bulb on your Skoda Kodiaq through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Skoda Kodiaq by the new one (be sure to verify if it’s an orange or transparent bulb).
  • Reassemble and test that the new front turn signal bulb operates.

    • Replace the front turn signal bulb of your Skoda Kodiaq through the wheel arch:

    This tactic is especially useful when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and take out the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same basic steps as on the part previously seen.

    Replace the front turn signal bulb of your Skoda Kodiaq through the bumper:

    On some years or finishes, depending on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will describe them now:

    • Put your Skoda Kodiaq on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Beware with the plastic staples which can be delicate.
    • Take off your headlight block and swap the front turn indicator bulb of your Skoda Kodiaq following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    If you have any additional questions about the Skoda Kodiaq, do not hesitate to consult our Skoda Kodiaq category.