It doesn’t matter if for your own safety, for roadworthiness testing or to avoid a fine, by ensuring your turn signal bulbs are always functional is important. In fact, bulbs are wearing parts that will predictably burn out in the future and as a result need to be replaced. You’re likely on the website because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Skoda Kamiq, we’ve written this article content to help you do it without help and not have to go to your auto technician. In a first part, we will take a look at the checking a burnt-out front turn signal bulb on your Skoda Kamiq and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-skoda-kamiq

How to know if the front turn signal bulb on your Skoda Kamiq is burnt out or needs to be swapped out?

When you drive your vehicle you don’t always have the possibility to examine all the safety components of your Skoda Kamiq. In fact, you are most likely in a hurry and tend to enter into your vehicle, make your trip and put it down immediately without taking the time to do an unexpected check-up. It is consequently important to take the time to occasionally examine the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Skoda Kamiq, but that you didn’t become aware of it. Here are the two simple solutions to examine if a front turn signal is burnt out or if you need to replace it quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are functioning.
  • By listening to the sound of your blinkers. In fact, there is an audible indication on each car that informs you of a front turn indicator bulb burnt out on your Skoda Kamiq, you will recognize that the time between each “click” is much closer, this denotes that you will have to replace the front turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual examine as on the first process shown above.

You may have another bulb to replace, like the one of your low beam or your position lights, don’t be reluctant to browse our blog posts to help you to perform this substitution.

Changing the front turn signal bulb on your Skoda Kamiq

Now let’s go to the most significant part of this article content, how to change the front turn signal bulb of your Skoda Kamiq? You should be aware that this process is really easy, you will have to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Skoda Kamiq. If it is a bulb on your rear turn signal, see our specific article content. However, here are the details of the steps to stick to to be able to carry out this action accurately dependant on the technique you want to adopt.

Replace front turn signal bulb on your Skoda Kamiq through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Skoda Kamiq by the new one (be sure to examine if it’s an orange or transparent bulb).
  • Reassemble and check that the new front turn signal bulb operates.

    • Replace the front turn signal bulb of your Skoda Kamiq through the wheel arch:

    This process is specifically effective when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and take off the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same guidelines as on the part previously seen.

    Replace the front turn signal bulb of your Skoda Kamiq through the bumper:

    On some years or finishes, based on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will detail them now:

    • Put your Skoda Kamiq on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be careful with the plastic staples which can be breakable.
    • Take out your headlight block and replace the front turn indicator bulb of your Skoda Kamiq following the steps seen in the parts seen earlier.
    • Put the whole thing back together again.

    Whenever you have any additional questions about the Skoda Kamiq, do not hesitate to consult our Skoda Kamiq category.