Regardless for your personal safety, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are always functioning is imperative. In fact, bulbs are wearing parts that will inevitably burn out as time passes and as a result need to be changed. You’re most certainly here because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your saab 9 3, we’ve written this content page to help you do it alone and independently and not have to go to your repair shop. In a first part, we will examine controling a burnt-out front turn signal bulb on your saab 9 3 and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-saab-9-3

How to recognise if the front turn signal bulb on your saab 9 3 is burnt out or needs to be swapped out?

When you drive your automobile you don’t always have the possibility to check all the safety equipments of your saab 9 3. In fact, you are often in a rush and tend to enter into your automobile, make your journey and put it down right away without taking the time to do an unexpected check-up. It is consequently fundamental to take the time to occasionally check the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your saab 9 3, but that you didn’t notice it. Here are the two simple methods to check if a front turn signal is burnt out or if you need to change it rather quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to check that they are operational.
  • By hearing to the sound of your blinkers. In fact, there is an audible indication on each car that informs you of a front turn indicator bulb burnt out on your saab 9 3, you will find out that the time between each “click” is much closer, this means that you will have to swap the front turn signal bulb or before. It’s up to you to check and check which one is burnt out by a visual check as on the first process shown previously.

You may have another bulb to change, like the one of your low beam or your position lights, don’t be reluctant to read our blog posts to help you to accomplish this replacing.

Replacing the front turn signal bulb on your saab 9 3

Now let’s go to the most significant part of this content page, how to change the front turn signal bulb of your saab 9 3? Please be aware that this technique is very simple, you will require to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your saab 9 3. If it is a bulb on your rear turn signal, see our specific content page. However, here are the details of the simple steps to stick to in order to perform this action correctly depending on the approach you wish to adopt.

Replace front turn signal bulb on your saab 9 3 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your saab 9 3 by the new one (be sure to check if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb works.
  • Replace the front turn signal bulb of your saab 9 3 through the wheel arch:

    This technique is extremely practical when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and take away the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Replace the front turn signal bulb of your saab 9 3 through the bumper:

    On some years or finishes, according to the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full technique, we will describe them now:

    • Put your saab 9 3 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be fragile.
    • Take out your headlight block and change the front turn indicator bulb of your saab 9 3 following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    To get more tips on the saab 9 3, take a look at the saab 9 3 category.