It doesn’t matter if for your own safety, for roadworthiness testing or to avoid a fine, ensuring your turn signal bulbs are always functioning is very important. In fact, bulbs are wearing parts that will predictably burn out after a while and as a consequence need to be changed. You’re almost certainly in this article because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Renault Twingo 2, we’ve written this article content to help you do it all on your own and not have to go to your technician. In a first section, we will take a look at controling a burnt-out front turn signal bulb on your Renault Twingo 2 and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-renault-twingo-2

How to discover if the front turn signal bulb on your Renault Twingo 2 is burnt out or needs to be swapped out?

When you drive your automobile you don’t always have the possibility to verify all the safety features of your Renault Twingo 2. In fact, you are frequently in a hurry and tend to enter into your automobile, make your journey and put it down instantly without taking the time to do an periodic check-up. It is as a consequence fundamental to take the time to occasionally verify the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Renault Twingo 2, but that you didn’t detect it. Here are the two simple methods to verify if a front turn signal is burnt out or if you need to swap it quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to verify that they are operational.
  • By hearing to the sound of your blinkers. In fact, there is an audible indicator on each car that warns you of a front turn indicator bulb burnt out on your Renault Twingo 2, you will recognise that the time between each “click” is much closer, this suggests that you will have to change the front turn signal bulb or before. It’s up to you to verify and verify which one is burnt out by a visual verify as on the first process shown earlier mentioned.

You may have another bulb to swap, like the one of your low beam or your position lights, don’t hesitate to consult our articles to help you to accomplish this substitution.

Changing the front turn signal bulb on your Renault Twingo 2

Now let’s go to the most significant section of this article content, how to change the front turn signal bulb of your Renault Twingo 2? Please be aware that this technique is quite easy, you will have to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Renault Twingo 2. If it is a bulb on your rear turn signal, see our dedicated article content. Nevertheless, here are the details of the actions to follow to be able to perform this act correctly dependant on the approach you wish to adopt.

Change front turn signal bulb on your Renault Twingo 2 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Renault Twingo 2 by the new one (make certain to verify if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb operates.
  • Change the front turn signal bulb of your Renault Twingo 2 through the wheel arch:

    This technique is extremely valuable when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take away the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same basic steps as on the part previously seen.

    Change the front turn signal bulb of your Renault Twingo 2 through the bumper:

    On some years or finishes, according to the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full technique, we will describe them now:

    • Put your Renault Twingo 2 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be delicate.
    • Take away your headlight block and swap the front turn indicator bulb of your Renault Twingo 2 following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    If perhaps you have any additional questions about the Renault Twingo 2, do not hesitate to consult our Renault Twingo 2 category.