Whether for your own security, for roadworthiness testing or to avoid a fine, ensuring your turn signal bulbs are always functional is extremely important. Indeed, bulbs are wearing parts that will predictably burn out over the years and as a consequence need to be changed. You’re most certainly on this site because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Porsche 911, we’ve created this article content to help you do it all on your own and not have to go to your repair shop. In a first step, we will examine controling a burnt-out front turn signal bulb on your Porsche 911 and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-porsche-911

How to recognise if the front turn signal bulb on your Porsche 911 is burnt out or needs to be replaced?

When you drive your car you don’t constantly have the possibility to check all the security components of your Porsche 911. Indeed, you are often in a rush and tend to get into your car, make your trip and put it down immediately without taking the time to do an occasional check-up. It is as a consequence crucial to take the time to in some cases check the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Porsche 911, but that you didn’t detect it. Here are the two simple solutions to control if a front turn signal is burnt out or if you need to replace it quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to control that they are functional.
  • By hearing to the sound of your blinkers. Indeed, there is an audible indicator on each car that signals you of a front turn indicator bulb burnt out on your Porsche 911, you will perceive that the time between each “click” is much closer, this suggests that you will have to change the front turn signal bulb or before. It’s up to you to check and check which one is burnt out by a visual control as on the first methodology shown above.

You may have another bulb to replace, like the one of your low beam or your position lights, don’t be reluctant to read our articles to help you to complete this replacing.

Changing the front turn signal bulb on your Porsche 911

Now let’s go to the main step of this article content, how to change the front turn signal bulb of your Porsche 911? Take note that this process is quite simple, you will need to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Porsche 911. If it is a bulb on your rear turn signal, see our dedicated article content. On the other hand, here are the details of the guidelines to stick to in order to carry out this action efficiently according to the solution you want to choose.

Replace front turn signal bulb on your Porsche 911 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Porsche 911 by the new one (be sure to check if it’s an orange or transparent bulb).
  • Reassemble and test that the new front turn signal bulb works.

    • Replace the front turn signal bulb of your Porsche 911 through the wheel arch:

    This procedure is particularly practical when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Replace the front turn signal bulb of your Porsche 911 through the bumper:

    On some years or finishes, dependant on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will point them now:

    • Put your Porsche 911 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be mindful with the plastic staples which can be breakable.
    • Remove your headlight block and replace the front turn indicator bulb of your Porsche 911 following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    If you have any further questions about the Porsche 911, do not hesitate to consult our Porsche 911 category.