Whether for your personal safety, for roadworthiness testing or to avoid a fine, by ensuring your turn signal bulbs are always working is very important. In reality, bulbs are wearing parts that will definitely burn out over the years and therefore need to be changed. You’re most likely here because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Peugeot Traveller, we’ve created this article to help you do it without help and not have to go to your auto technician. In a first step, we will take a look at controling a burnt-out front turn signal bulb on your Peugeot Traveller and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-peugeot-traveller

How to find out if the front turn signal bulb on your Peugeot Traveller is burnt out or needs to be changed?

When you drive your motor vehicle you don’t always have the opportunity to verify all the safety components of your Peugeot Traveller. In reality, you are most likely in a hurry and tend to enter into your motor vehicle, make your trip and put it down instantly without taking the time to do an unexpected check-up. It is as a result relevant to take the time to once in a while verify the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Peugeot Traveller, but that you didn’t detect it. Here are the two simple solutions to check if a front turn signal is burnt out or if you need to swap it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to check that they are working.
  • By hearing to the sound of your blinkers. In reality, there is an audible indicator on each car that signals you of a front turn indicator bulb burnt out on your Peugeot Traveller, you will identify that the time between each “click” is much closer, this means that you will have to change the front turn signal bulb or before. It’s up to you to verify and check out which one is burnt out by a visual check as on the first procedure shown earlier mentioned.

You may have an additional bulb to swap, like the one of your low beam or your position lights, don’t hesitate to browse our content articles to help you to accomplish this replacement.

Changing the front turn signal bulb on your Peugeot Traveller

Now let’s go to the main step of this article, how to change the front turn signal bulb of your Peugeot Traveller? You should be aware that this procedure is uncomplicated, you will require to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Peugeot Traveller. If it is a bulb on your rear turn signal, see our special article. However, here are the details of the simple steps to follow in order to conduct this action properly depending on the strategy you desire to adopt.

Change front turn signal bulb on your Peugeot Traveller through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Peugeot Traveller by the new one (make certain to verify if it’s an orange or transparent bulb).
  • Reassemble and check that the new front turn signal bulb works.

    • Change the front turn signal bulb of your Peugeot Traveller through the wheel arch:

    This tactic is particularly effective when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and take off the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same guidelines as on the part previously seen.

    Change the front turn signal bulb of your Peugeot Traveller through the bumper:

    On some years or finishes, depending on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full technique, we will explain them right now:

    • Put your Peugeot Traveller on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be delicate.
    • Take off your headlight block and swap the front turn indicator bulb of your Peugeot Traveller following the steps seen in the parts seen earlier.
    • Put the whole thing back together again.

    If you want more tutorials on the Peugeot Traveller, go to our Peugeot Traveller category.