It doesn’t matter if for your own safety, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are always operational is important. In fact, bulbs are wearing parts that will obviously burn out after awhile and as a result need to be changed. You’re perhaps in this article because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Peugeot Rifter, we’ve written and published this article to help you do it without hiring somebody and not have to go to your auto technician. In a first part, we will have a look at controling a burnt-out front turn signal bulb on your Peugeot Rifter and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-peugeot-rifter

How to find out if the front turn signal bulb on your Peugeot Rifter is burnt out or needs to be replaced?

When you drive your automobile you don’t always have the opportunity to examine all the safety features of your Peugeot Rifter. In fact, you are in many cases in a rush and tend to enter into your automobile, make your trip and put it down immediately without taking the time to do an occasional check-up. It is as a result relevant to take the time to sometimes examine the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Peugeot Rifter, but that you didn’t notice it. Here are the two simple techniques to examine if a front turn signal is burnt out or if you need to swap it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are operational.
  • By hearing to the sound of your blinkers. In fact, there is an audible sign on each car that signals you of a front turn indicator bulb burnt out on your Peugeot Rifter, you will identify that the time between each “click” is much shorter, this suggests that you will have to swap the front turn signal bulb or before. It’s up to you to examine and examine which one is burnt out by a visual examine as on the first process shown previously.

You may have another bulb to swap, like the one of your low beam or your position lights, don’t hesitate to read our blog posts to help you to conduct this replacing.

Changing the front turn signal bulb on your Peugeot Rifter

Now let’s go to the main part of this article, how to change the front turn signal bulb of your Peugeot Rifter? Please note that this technique is uncomplicated, you will have to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Peugeot Rifter. If it is a bulb on your rear turn signal, see our specific article. However, here are the details of the steps to stick to in order to perform this action correctly according to the strategy you wish to adopt.

Replace front turn signal bulb on your Peugeot Rifter through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Peugeot Rifter by the new one (make certain to examine if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb is effective.

    • Replace the front turn signal bulb of your Peugeot Rifter through the wheel arch:

    This approach is especially useful when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same simple steps as on the part previously seen.

    Change the front turn signal bulb of your Peugeot Rifter through the bumper:

    On some years or finishes, according to the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full technique, we will describe them now:

    • Put your Peugeot Rifter on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be mindful with the plastic staples which can be breakable.
    • Take off your headlight block and swap the front turn indicator bulb of your Peugeot Rifter following the steps seen in the parts seen earlier.
    • Put the whole thing back together again.

    To get more tips on the Peugeot Rifter, take a look at the Peugeot Rifter category.