It doesn’t matter if for your own safety, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are always functioning is important. In reality, bulbs are wearing parts that will predictably burn out over the years and as a result need to be swapped out. You’re likely on the website because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Peugeot e-208, we’ve made this document to help you do it by yourself and not have to go to your repair shop. In a first part, we will look at controling a burnt-out front turn signal bulb on your Peugeot e-208 and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-peugeot-e-208

How to recognize if the front turn signal bulb on your Peugeot e-208 is burnt out or needs to be changed?

When you drive your motor vehicle you don’t constantly have the opportunity to examine all the safety features of your Peugeot e-208. In reality, you are most likely in a hurry and tend to enter into your motor vehicle, make your journey and put it down immediately without taking the time to do an regular check-up. It is consequently fundamental to take the time to sometimes examine the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Peugeot e-208, but that you didn’t become aware of it. Here are the two simple options to control if a front turn signal is burnt out or if you need to replace it rather quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to control that they are functional.
  • By hearing to the sound of your blinkers. In reality, there is an audible signal on each car that informs you of a front turn indicator bulb burnt out on your Peugeot e-208, you will perceive that the time between each “click” is much shorter, this suggests that you will have to change the front turn signal bulb or before. It’s up to you to examine and examine which one is burnt out by a visual control as on the first technique shown previously.

You may have another bulb to replace, like the one of your low beam or your position lights, don’t be reluctant to consult our articles to help you to perform this substitution.

Replacing the front turn signal bulb on your Peugeot e-208

Now let’s go to the main part of this document, how to change the front turn signal bulb of your Peugeot e-208? You should be aware that this operation is fairly simple, you will require to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Peugeot e-208. If it is a bulb on your rear turn signal, see our specific document. However, here are the details of the guidelines to stick to in order to perform this action correctly depending on the method you want to adopt.

Replace front turn signal bulb on your Peugeot e-208 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Peugeot e-208 by the new one (be sure to examine if it’s an orange or transparent bulb).
  • Reassemble and check that the new front turn signal bulb functions.

    • Replace the front turn signal bulb of your Peugeot e-208 through the wheel arch:

    This tactic is especially useful when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same guidelines as on the part previously seen.

    Replace the front turn signal bulb of your Peugeot e-208 through the bumper:

    On some years or finishes, dependant on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will point them right now:

    • Put your Peugeot e-208 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be mindful with the plastic staples which can be breakable.
    • Take off your headlight block and replace the front turn indicator bulb of your Peugeot e-208 following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    Whenever you have any additional questions about the Peugeot e-208, do not hesitate to consult our Peugeot e-208 category.