It doesn’t matter if for your personal safety, for roadworthiness testing or to avoid a fine, ensuring that your turn signal bulbs are always functioning is very important. Indeed, bulbs are wearing parts that will undoubtedly burn out after awhile and as a result need to be swapped out. You’re almost certainly here because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Peugeot Boxer, we’ve written this content page to help you do it by yourself and not have to go to your auto mechanic. In a first part, we will have a look at the checking a burnt-out front turn signal bulb on your Peugeot Boxer and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-peugeot-boxer

How to recognise if the front turn signal bulb on your Peugeot Boxer is burnt out or needs to be replaced?

When you drive your car you don’t constantly have the possibility to examine all the safety components of your Peugeot Boxer. Indeed, you are often in a rush and tend to get into your car, make your journey and put it down instantly without taking the time to do an periodic check-up. It is therefore important to take the time to once in a while examine the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Peugeot Boxer, but that you didn’t notice it. Here are the two simple options to examine if a front turn signal is burnt out or if you need to swap it fairly quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are working.
  • By listening to the sound of your blinkers. Indeed, there is an audible indicator on each car that alerts you of a front turn indicator bulb burnt out on your Peugeot Boxer, you will identify that the time between each “click” is much shorter, this suggests that you will have to change the front turn signal bulb or before. It’s up to you to examine and check out which one is burnt out by a visual examine as on the first procedure shown earlier mentioned.

You may have an additional bulb to swap, like the one of your low beam or your position lights, don’t be reluctant to consult our articles to help you to accomplish this replacing.

Replacing the front turn signal bulb on your Peugeot Boxer

Now let’s go to the most significant part of this content page, how to change the front turn signal bulb of your Peugeot Boxer? You should be aware that this task is very simple, you will need to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Peugeot Boxer. If it is a bulb on your rear turn signal, see our specific content page. Nevertheless, here are the details of the simple steps to follow in order to execute this act efficiently dependant on the technique you want to choose.

Change front turn signal bulb on your Peugeot Boxer through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Peugeot Boxer by the new one (ensure to examine if it’s an orange or transparent bulb).
  • Reassemble and check that the new front turn signal bulb is effective.

    • Change the front turn signal bulb of your Peugeot Boxer through the wheel arch:

    This tactic is specially practical when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same simple steps as on the part previously seen.

    Replace the front turn signal bulb of your Peugeot Boxer through the bumper:

    On some years or finishes, depending on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will describe them now:

    • Put your Peugeot Boxer on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Beware with the plastic staples which can be breakable.
    • Take out your headlight block and swap the front turn indicator bulb of your Peugeot Boxer following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    If you need more tutorials on the Peugeot Boxer, go to our Peugeot Boxer category.