Whether for your personal safety, for roadworthiness testing or to avoid a fine, ensuring your turn signal bulbs are always working is imperative. In reality, bulbs are wearing parts that will undoubtedly burn out in the future and as a consequence need to be swapped out. You’re most likely on this site because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Peugeot Boxer 2, we’ve written this article to help you do it on your own and not have to go to your mechanic. In a first part, we will have a look at the checking a burnt-out front turn signal bulb on your Peugeot Boxer 2 and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-peugeot-boxer-2

How to recognise if the front turn signal bulb on your Peugeot Boxer 2 is burnt out or needs to be changed?

When you drive your motor vehicle you don’t constantly have the possibility to examine all the safety features of your Peugeot Boxer 2. In reality, you are often times in a hurry and tend to get into your motor vehicle, make your journey and put it down right away without taking the time to do an occasional check-up. It is consequently crucial to take the time to once in a while examine the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Peugeot Boxer 2, but that you didn’t realize it. Here are the two simple methods to examine if a front turn signal is burnt out or if you need to replace it quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are functional.
  • By hearing to the sound of your blinkers. In reality, there is an audible signal on each car that signals you of a front turn indicator bulb burnt out on your Peugeot Boxer 2, you will recognise that the time between each “click” is much closer, this means that you will have to replace the front turn signal bulb or before. It’s up to you to examine and check which one is burnt out by a visual examine as on the first procedure shown previously.

You may have an additional bulb to replace, like the one of your low beam or your position lights, don’t be reluctant to browse our articles to help you to conduct this replacement.

Changing the front turn signal bulb on your Peugeot Boxer 2

Now let’s go to the main part of this article, how to change the front turn signal bulb of your Peugeot Boxer 2? Please note that this procedure is uncomplicated, you will have to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Peugeot Boxer 2. If it is a bulb on your rear turn signal, see our special article. Nevertheless, here are the details of the actions to stick to in order to conduct this act efficiently according to the technique you wish to adopt.

Change front turn signal bulb on your Peugeot Boxer 2 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Peugeot Boxer 2 by the new one (ensure to examine if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb functions.

    • Change the front turn signal bulb of your Peugeot Boxer 2 through the wheel arch:

    This methodology is especially effective when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and take off the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same steps as on the part previously seen.

    Replace the front turn signal bulb of your Peugeot Boxer 2 through the bumper:

    On some years or finishes, based on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full technique, we will describe them now:

    • Put your Peugeot Boxer 2 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Beware with the plastic staples which can be delicate.
    • Remove your headlight block and replace the front turn indicator bulb of your Peugeot Boxer 2 following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    To find more tips on the Peugeot Boxer 2, take a look at the Peugeot Boxer 2 category.