Regardless for your own security, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are always functional is very important. Indeed, bulbs are wearing parts that will predictably burn out in the future and therefore need to be swapped out. You’re most likely in this article because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Peugeot Bipper, we’ve created this article to help you do it alone and not have to go to your technician. In a first section, we will examine controling a burnt-out front turn signal bulb on your Peugeot Bipper and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-peugeot-bipper

How to discover if the front turn signal bulb on your Peugeot Bipper is burnt out or needs to be replaced?

When you drive your car you don’t always have the possibility to check all the security features of your Peugeot Bipper. Indeed, you are in general in a rush and tend to enter into your car, make your journey and put it down immediately without taking the time to do an occasional check-up. It is as a consequence essential to take the time to occasionally check the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Peugeot Bipper, but that you didn’t notice it. Here are the two simple solutions to verify if a front turn signal is burnt out or if you need to change it rather quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to verify that they are functional.
  • By hearing to the sound of your blinkers. Indeed, there is an audible indicator on each car that informs you of a front turn indicator bulb burnt out on your Peugeot Bipper, you will recognise that the time between each “click” is much closer, this suggests that you will have to change the front turn signal bulb or before. It’s up to you to check and check which one is burnt out by a visual verify as on the first methodology shown above.

You may have an additional bulb to change, like the one of your low beam or your position lights, don’t hesitate to consult our content articles to help you to perform this substitution.

Replacing the front turn signal bulb on your Peugeot Bipper

Now let’s go to the most essential section of this article, how to change the front turn signal bulb of your Peugeot Bipper? Please be aware that this task is very simple, you will require to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Peugeot Bipper. If it is a bulb on your rear turn signal, see our specific article. On the other hand, here are the details of the actions to follow in order to perform this action properly depending on the strategy you want to choose.

Change front turn signal bulb on your Peugeot Bipper through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Peugeot Bipper by the new one (ensure to check if it’s an orange or transparent bulb).
  • Reassemble and test that the brand-new front turn signal bulb functions.
  • Change the front turn signal bulb of your Peugeot Bipper through the wheel arch:

    This process is specifically valuable when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take away the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Change the front turn signal bulb of your Peugeot Bipper through the bumper:

    On some years or finishes, according to the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full technique, we will explain them now:

    • Put your Peugeot Bipper on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be careful with the plastic staples which can be breakable.
    • Take out your headlight block and change the front turn indicator bulb of your Peugeot Bipper following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    To find more tips on the Peugeot Bipper, take a look at the Peugeot Bipper category.