Regardless for your own security, for roadworthiness testing or to avoid a fine, ensuring your turn signal bulbs are always functioning is extremely important. In reality, bulbs are wearing parts that will obviously burn out after some time and therefore need to be swapped out. You’re most likely on the website because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Peugeot 607, we’ve made this content to help you do it without hiring somebody and not have to go to your mechanic. In a first section, we will examine controling a burnt-out front turn signal bulb on your Peugeot 607 and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-peugeot-607

How to recognize if the front turn signal bulb on your Peugeot 607 is burnt out or needs to be changed?

When you drive your car you don’t constantly have the possibility to examine all the security features of your Peugeot 607. In reality, you are in many cases in a rush and tend to enter into your car, make your journey and put it down immediately without taking the time to do an occasional check-up. It is consequently important to take the time to in some cases examine the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Peugeot 607, but that you didn’t notice it. Here are the two simple options to check if a front turn signal is burnt out or if you need to change it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to check that they are operational.
  • By listening to the sound of your blinkers. In reality, there is an audible indicator on each car that alerts you of a front turn indicator bulb burnt out on your Peugeot 607, you will recognize that the time between each “click” is much closer, this means that you will have to swap the front turn signal bulb or before. It’s up to you to examine and make sure which one is burnt out by a visual check as on the first process shown above.

You may have another bulb to change, like the one of your low beam or your position lights, don’t be reluctant to browse our blog posts to help you to conduct this replacement.

Changing the front turn signal bulb on your Peugeot 607

Now let’s go to the most important section of this content, how to change the front turn signal bulb of your Peugeot 607? You should be aware that this operation is fairly simple, you will require to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Peugeot 607. If it is a bulb on your rear turn signal, see our specific content. Nevertheless, here are the details of the actions to follow in order to conduct this act correctly dependant on the technique you desire to choose.

Replace front turn signal bulb on your Peugeot 607 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Peugeot 607 by the new one (make sure to examine if it’s an orange or transparent bulb).
  • Reassemble and check that the new front turn signal bulb functions.

    • Replace the front turn signal bulb of your Peugeot 607 through the wheel arch:

    This tactic is specially useful when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take away the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same guidelines as on the part previously seen.

    Replace the front turn signal bulb of your Peugeot 607 through the bumper:

    On some years or finishes, dependant on the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will point them right now:

    • Put your Peugeot 607 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be vulnerable.
    • Take out your headlight block and change the front turn indicator bulb of your Peugeot 607 following the steps seen in the parts seen earlier.
    • Put the whole thing back together again.

    To find more tips on the Peugeot 607, take a look at the Peugeot 607 category.