Regardless whether for your personal safety, for roadworthiness testing or to avoid a fine, being sure your turn signal bulbs are always functioning is very important. In reality, bulbs are wearing parts that will definitely burn out in the future and as a result need to be changed. You’re perhaps on this website because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Peugeot 307, we’ve written and published this document to help you do it all on your own and not have to go to your auto technician. In a first part, we will examine the checking a burnt-out front turn signal bulb on your Peugeot 307 and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-peugeot-307

How to know if the front turn signal bulb on your Peugeot 307 is burnt out or needs to be replaced?

When you drive your automobile you don’t constantly have the opportunity to examine all the safety features of your Peugeot 307. In reality, you are in many cases in a rush and tend to get into your automobile, make your trip and put it down immediately without taking the time to do an occasional check-up. It is as a consequence important to take the time to once in a while examine the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Peugeot 307, but that you didn’t realize it. Here are the two simple techniques to verify if a front turn signal is burnt out or if you need to replace it fairly quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to verify that they are working.
  • By listening to the sound of your blinkers. In reality, there is an audible indication on each car that alerts you of a front turn indicator bulb burnt out on your Peugeot 307, you will perceive that the time between each “click” is much closer, this denotes that you will have to replace the front turn signal bulb or before. It’s up to you to examine and check which one is burnt out by a visual verify as on the first procedure shown earlier mentioned.

You may have another bulb to replace, like the one of your low beam or your position lights, don’t hesitate to consult our content articles to help you to perform this substitution.

Replacing the front turn signal bulb on your Peugeot 307

Now let’s go to the main part of this document, how to replace the front turn signal bulb of your Peugeot 307? You should be aware that this procedure is quite easy, you will require to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Peugeot 307. If it is a bulb on your rear turn signal, see our dedicated document. Nevertheless, here are the details of the simple steps to follow in order to accomplish this act accurately dependant on the approach you want to adopt.

Change front turn signal bulb on your Peugeot 307 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Peugeot 307 by the new one (be sure to examine if it’s an orange or transparent bulb).
  • Reassemble and check that the new front turn signal bulb operates.

    • Change the front turn signal bulb of your Peugeot 307 through the wheel arch:

    This solution is specifically effective when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same simple steps as on the part previously seen.

    Replace the front turn signal bulb of your Peugeot 307 through the bumper:

    On some years or finishes, dependant on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will point them right now:

    • Put your Peugeot 307 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be careful with the plastic staples which can be breakable.
    • Take out your headlight block and replace the front turn indicator bulb of your Peugeot 307 following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    If you wish more tutorials on the Peugeot 307, go to our Peugeot 307 category.