Regardless whether for your own safety, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are always working is extremely important. In fact, bulbs are wearing parts that will predictably burn out over the years and as a consequence need to be swapped out. You’re most certainly in this article because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Peugeot 207, we’ve written and published this article content to help you do it all on your own and not have to go to your technician. In a first step, we will take a look at the checking a burnt-out front turn signal bulb on your Peugeot 207 and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-peugeot-207

How to find out if the front turn signal bulb on your Peugeot 207 is burnt out or needs to be replaced?

When you drive your motor vehicle you don’t always have the opportunity to verify all the safety equipments of your Peugeot 207. In fact, you are in general in a hurry and tend to enter into your motor vehicle, make your journey and put it down right away without taking the time to do an regular check-up. It is as a result essential to take the time to once in a while verify the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Peugeot 207, but that you didn’t notice it. Here are the two simple techniques to check if a front turn signal is burnt out or if you need to swap it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to check that they are working.
  • By hearing to the sound of your blinkers. In fact, there is an audible indicator on each car that signals you of a front turn indicator bulb burnt out on your Peugeot 207, you will identify that the time between each “click” is much closer, this means that you will have to replace the front turn signal bulb or before. It’s up to you to verify and verify which one is burnt out by a visual check as on the first process shown previously.

You may have another bulb to swap, like the one of your low beam or your position lights, don’t hesitate to consult our blog posts to help you to do this replacement.

Changing the front turn signal bulb on your Peugeot 207

Now let’s go to the main step of this article content, how to replace the front turn signal bulb of your Peugeot 207? Please note that this operation is fairly simple, you will require to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Peugeot 207. If it is a bulb on your rear turn signal, see our special article content. Nevertheless, here are the details of the guidelines to stick to in order to conduct this action correctly according to the strategy you wish to choose.

Change front turn signal bulb on your Peugeot 207 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Peugeot 207 by the new one (ensure to verify if it’s an orange or transparent bulb).
  • Reassemble and test that the brand-new front turn signal bulb works.
  • Change the front turn signal bulb of your Peugeot 207 through the wheel arch:

    This process is specially valuable when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take off the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Replace the front turn signal bulb of your Peugeot 207 through the bumper:

    On some years or finishes, based on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will describe them now:

    • Put your Peugeot 207 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be breakable.
    • Remove your headlight block and swap the front turn indicator bulb of your Peugeot 207 following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    To discover more tips on the Peugeot 207, take a look at the Peugeot 207 category.