Regardless for your own safety, for roadworthiness testing or to avoid a fine, ensuring that your turn signal bulbs are always operational is imperative. In reality, bulbs are wearing parts that will obviously burn out after awhile and as a consequence need to be changed. You’re likely here because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Peugeot 107, we’ve created this article to help you do it alone and not have to go to your auto mechanic. In a first part, we will have a look at the checking a burnt-out front turn signal bulb on your Peugeot 107 and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-peugeot-107

How to know if the front turn signal bulb on your Peugeot 107 is burnt out or needs to be replaced?

When you drive your automobile you don’t constantly have the possibility to verify all the safety components of your Peugeot 107. In reality, you are nearly always in a rush and tend to enter into your automobile, make your journey and put it down instantly without taking the time to do an periodic check-up. It is consequently crucial to take the time to in some cases verify the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Peugeot 107, but that you didn’t detect it. Here are the two simple techniques to examine if a front turn signal is burnt out or if you need to replace it fairly quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are working.
  • By listening to the sound of your blinkers. In reality, there is an audible indicator on each car that alerts you of a front turn indicator bulb burnt out on your Peugeot 107, you will recognise that the time between each “click” is much shorter, this suggests that you will have to swap the front turn signal bulb or before. It’s up to you to verify and check out which one is burnt out by a visual examine as on the first process shown previously.

You may have an additional bulb to replace, like the one of your low beam or your position lights, don’t be reluctant to consult our blog posts to help you to conduct this replacing.

Changing the front turn signal bulb on your Peugeot 107

Now let’s go to the most important part of this article, how to replace the front turn signal bulb of your Peugeot 107? Please be aware that this procedure is quite easy, you will require to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Peugeot 107. If it is a bulb on your rear turn signal, see our dedicated article. Nevertheless, here are the details of the steps to stick to to be able to execute this action properly dependant on the strategy you want to adopt.

Change front turn signal bulb on your Peugeot 107 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Peugeot 107 by the new one (be sure to verify if it’s an orange or transparent bulb).
  • Reassemble and test that the new front turn signal bulb operates.

    • Change the front turn signal bulb of your Peugeot 107 through the wheel arch:

    This process is especially useful when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take away the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Replace the front turn signal bulb of your Peugeot 107 through the bumper:

    On some years or finishes, based on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will point them now:

    • Put your Peugeot 107 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be vulnerable.
    • Take off your headlight block and replace the front turn indicator bulb of your Peugeot 107 following the steps seen in the parts seen earlier.
    • Put the whole thing back together again.

    If you want more guides on the Peugeot 107, go to our Peugeot 107 category.