Whether for your own security, for roadworthiness testing or to avoid a fine, ensuring that your turn signal bulbs are always operational is important. Indeed, bulbs are wearing parts that will inevitably burn out with time and as a consequence need to be swapped out. You’re most certainly on this site because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Opel Crossland, we’ve created this article content to help you do it alone and not have to go to your repair shop. In a first section, we will look at controling a burnt-out front turn signal bulb on your Opel Crossland and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-opel-crossland

How to know if the front turn signal bulb on your Opel Crossland is burnt out or needs to be changed?

When you drive your vehicle you don’t constantly have the possibility to check all the security equipments of your Opel Crossland. Indeed, you are frequently in a hurry and tend to get into your vehicle, make your journey and put it down instantly without taking the time to do an regular check-up. It is as a consequence crucial to take the time to in some cases check the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Opel Crossland, but that you didn’t realize it. Here are the two simple ways to examine if a front turn signal is burnt out or if you need to change it quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are working.
  • By listening to the sound of your blinkers. Indeed, there is an audible indication on each car that warns you of a front turn indicator bulb burnt out on your Opel Crossland, you will perceive that the time between each “click” is much closer, this means that you will have to swap the front turn signal bulb or before. It’s up to you to check and examine which one is burnt out by a visual examine as on the first solution shown above.

You may have an additional bulb to change, like the one of your low beam or your position lights, don’t hesitate to read our content articles to help you to achieve this substitution.

Replacing the front turn signal bulb on your Opel Crossland

Now let’s go to the most important section of this article content, how to replace the front turn signal bulb of your Opel Crossland? You should be aware that this operation is really easy, you will need to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Opel Crossland. If it is a bulb on your rear turn signal, see our dedicated article content. On the other hand, here are the details of the steps to stick to in order to conduct this act correctly depending on the approach you want to choose.

Change front turn signal bulb on your Opel Crossland through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Opel Crossland by the new one (be sure to check if it’s an orange or transparent bulb).
  • Reassemble and test that the new front turn signal bulb works.

    • Change the front turn signal bulb of your Opel Crossland through the wheel arch:

    This tactic is in particular valuable when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take out the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same basic steps as on the part previously seen.

    Change the front turn signal bulb of your Opel Crossland through the bumper:

    On some years or finishes, according to the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will point them right now:

    • Put your Opel Crossland on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Beware with the plastic staples which can be delicate.
    • Take away your headlight block and change the front turn indicator bulb of your Opel Crossland following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    If you have any further questions about the Opel Crossland, do not hesitate to consult our Opel Crossland category.