Regardless whether for your personal safety, for roadworthiness testing or to avoid a fine, ensuring your turn signal bulbs are always functional is imperative. Indeed, bulbs are wearing parts that will obviously burn out over the years and as a consequence need to be swapped out. You’re most likely on the website because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Nissan Murano, we’ve written and published this article content to help you do it all on your own and not have to go to your auto technician. In a first step, we will take a look at controling a burnt-out front turn signal bulb on your Nissan Murano and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-nissan-murano

How to recognise if the front turn signal bulb on your Nissan Murano is burnt out or needs to be swapped out?

When you drive your automobile you don’t constantly have the possibility to verify all the safety components of your Nissan Murano. Indeed, you are frequently in a rush and tend to enter into your automobile, make your trip and put it down immediately without taking the time to do an occasional check-up. It is therefore relevant to take the time to sometimes verify the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Nissan Murano, but that you didn’t detect it. Here are the two simple options to verify if a front turn signal is burnt out or if you need to swap it rather quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to verify that they are functioning.
  • By hearing to the sound of your blinkers. Indeed, there is an audible sign on each car that informs you of a front turn indicator bulb burnt out on your Nissan Murano, you will find out that the time between each “click” is much closer, this denotes that you will have to swap the front turn signal bulb or before. It’s up to you to verify and make sure which one is burnt out by a visual verify as on the first solution shown previously.

You may have an additional bulb to swap, like the one of your low beam or your position lights, don’t hesitate to browse our content articles to help you to carry out this substitution.

Replacing the front turn signal bulb on your Nissan Murano

Now let’s go to the most important step of this article content, how to change the front turn signal bulb of your Nissan Murano? Please note that this procedure is really easy, you will need to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Nissan Murano. If it is a bulb on your rear turn signal, see our specific article content. However, here are the details of the simple steps to follow to be able to perform this act properly depending on the method you want to choose.

Change front turn signal bulb on your Nissan Murano through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Nissan Murano by the new one (make certain to verify if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb works.

    • Change the front turn signal bulb of your Nissan Murano through the wheel arch:

    This tactic is extremely valuable when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same basic steps as on the part previously seen.

    Change the front turn signal bulb of your Nissan Murano through the bumper:

    On some years or finishes, dependant on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will detail them now:

    • Put your Nissan Murano on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be mindful with the plastic staples which can be breakable.
    • Remove your headlight block and swap the front turn indicator bulb of your Nissan Murano following the steps seen in the parts seen earlier.
    • Put the whole thing back together again.

    To discover more tips on the Nissan Murano, take a look at the Nissan Murano category.