Whether for your personal security, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are always functioning is extremely important. Indeed, bulbs are wearing parts that will inevitably burn out after some time and consequently need to be swapped out. You’re most certainly on this website because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Mercedes Vito, we’ve created this article content to help you do it on your own and not have to go to your technician. In a first part, we will examine controling a burnt-out front turn signal bulb on your Mercedes Vito and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-mercedes-vito

How to know if the front turn signal bulb on your Mercedes Vito is burnt out or needs to be replaced?

When you drive your vehicle you don’t constantly have the possibility to examine all the security features of your Mercedes Vito. Indeed, you are most of the time in a hurry and tend to get into your vehicle, make your trip and put it down instantly without taking the time to do an occasional check-up. It is therefore relevant to take the time to sometimes examine the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Mercedes Vito, but that you didn’t realize it. Here are the two simple techniques to control if a front turn signal is burnt out or if you need to replace it quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to control that they are operational.
  • By listening to the sound of your blinkers. Indeed, there is an audible sign on each car that alerts you of a front turn indicator bulb burnt out on your Mercedes Vito, you will recognise that the time between each “click” is much closer, this means that you will have to swap the front turn signal bulb or before. It’s up to you to examine and examine which one is burnt out by a visual control as on the first methodology shown earlier mentioned.

You may have an additional bulb to replace, like the one of your low beam or your position lights, don’t hesitate to read our articles to help you to complete this replacing.

Changing the front turn signal bulb on your Mercedes Vito

Now let’s go to the most significant part of this article content, how to change the front turn signal bulb of your Mercedes Vito? Please be aware that this operation is fairly simple, you will need to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Mercedes Vito. If it is a bulb on your rear turn signal, see our dedicated article content. However, here are the details of the guidelines to stick to to be able to execute this act efficiently depending on the strategy you desire to adopt.

Change front turn signal bulb on your Mercedes Vito through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Mercedes Vito by the new one (be sure to examine if it’s an orange or transparent bulb).
  • Reassemble and test that the brand-new front turn signal bulb works.

    • Change the front turn signal bulb of your Mercedes Vito through the wheel arch:

    This tactic is in particular useful when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Replace the front turn signal bulb of your Mercedes Vito through the bumper:

    On some years or finishes, depending on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will point them now:

    • Put your Mercedes Vito on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be careful with the plastic staples which can be vulnerable.
    • Remove your headlight block and replace the front turn indicator bulb of your Mercedes Vito following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    If you want more tutorials on the Mercedes Vito, go to our Mercedes Vito category.