It doesn’t matter if for your own safety, for roadworthiness testing or to avoid a fine, making sure your turn signal bulbs are always functional is very important. In reality, bulbs are wearing parts that will inevitably burn out over time and as a result need to be swapped out. You’re perhaps in this article because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Mercedes Classe C, we’ve created this content page to help you do it without help and not have to go to your mechanic. In a first section, we will have a look at controling a burnt-out front turn signal bulb on your Mercedes Classe C and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-mercedes-classe-c

How to know if the front turn signal bulb on your Mercedes Classe C is burnt out or needs to be replaced?

When you drive your car you don’t always have the possibility to examine all the safety features of your Mercedes Classe C. In reality, you are most of the time in a rush and tend to enter into your car, make your journey and put it down immediately without taking the time to do an occasional check-up. It is as a consequence crucial to take the time to in some cases examine the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Mercedes Classe C, but that you didn’t notice it. Here are the two simple methods to examine if a front turn signal is burnt out or if you need to change it quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are working.
  • By listening to the sound of your blinkers. In reality, there is an audible sign on each car that warns you of a front turn indicator bulb burnt out on your Mercedes Classe C, you will notice that the time between each “click” is much closer, this suggests that you will have to replace the front turn signal bulb or before. It’s up to you to examine and check which one is burnt out by a visual examine as on the first solution shown earlier mentioned.

You may have an additional bulb to change, like the one of your low beam or your position lights, don’t be reluctant to browse our blog posts to help you to carry out this substitution.

Changing the front turn signal bulb on your Mercedes Classe C

Now let’s go to the most essential section of this content page, how to change the front turn signal bulb of your Mercedes Classe C? You should be aware that this process is very simple, you will require to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Mercedes Classe C. If it is a bulb on your rear turn signal, see our specific content page. Nevertheless, here are the details of the actions to stick to to be able to carry out this act correctly dependant on the method you desire to adopt.

Replace front turn signal bulb on your Mercedes Classe C through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Mercedes Classe C by the new one (be sure to examine if it’s an orange or transparent bulb).
  • Reassemble and test that the new front turn signal bulb is effective.

    • Replace the front turn signal bulb of your Mercedes Classe C through the wheel arch:

    This methodology is specifically useful when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same basic steps as on the part previously seen.

    Replace the front turn signal bulb of your Mercedes Classe C through the bumper:

    On some years or finishes, according to the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will explain them right now:

    • Put your Mercedes Classe C on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be vulnerable.
    • Take off your headlight block and change the front turn indicator bulb of your Mercedes Classe C following the steps seen in the parts seen earlier.
    • Put the whole thing back together again.

    To get more tips on the Mercedes Classe C, take a look at the Mercedes Classe C category.