Whether for your personal safety, for roadworthiness testing or to avoid a fine, by ensuring your turn signal bulbs are always functioning is important. In reality, bulbs are wearing parts that will undoubtedly burn out with time and therefore need to be swapped out. You’re probably on this website because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Lincoln MKZ, we’ve made this article content to help you do it by yourself and not have to go to your auto mechanic. In a first section, we will examine controling a burnt-out front turn signal bulb on your Lincoln MKZ and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-lincoln-mkz

How to recognize if the front turn signal bulb on your Lincoln MKZ is burnt out or needs to be changed?

When you drive your automobile you don’t constantly have the opportunity to check all the safety equipments of your Lincoln MKZ. In reality, you are often in a hurry and tend to enter into your automobile, make your trip and put it down right away without taking the time to do an periodic check-up. It is consequently important to take the time to occasionally check the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Lincoln MKZ, but that you didn’t notice it. Here are the two simple techniques to examine if a front turn signal is burnt out or if you need to change it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are working.
  • By hearing to the sound of your blinkers. In reality, there is an audible signal on each car that warns you of a front turn indicator bulb burnt out on your Lincoln MKZ, you will find out that the time between each “click” is much closer, this denotes that you will have to swap the front turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual examine as on the first methodology shown earlier mentioned.

You may have another bulb to change, like the one of your low beam or your position lights, don’t be reluctant to consult our articles to help you to achieve this replacing.

Replacing the front turn signal bulb on your Lincoln MKZ

Now let’s go to the most important section of this article content, how to replace the front turn signal bulb of your Lincoln MKZ? You should be aware that this procedure is really easy, you will need to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Lincoln MKZ. If it is a bulb on your rear turn signal, see our specific article content. On the other hand, here are the details of the steps to stick to to be able to execute this action properly dependant on the technique you wish to adopt.

Replace front turn signal bulb on your Lincoln MKZ through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Lincoln MKZ by the new one (be sure to check if it’s an orange or transparent bulb).
  • Reassemble and check that the new front turn signal bulb operates.
  • Replace the front turn signal bulb of your Lincoln MKZ through the wheel arch:

    This process is specifically useful when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same guidelines as on the part previously seen.

    Replace the front turn signal bulb of your Lincoln MKZ through the bumper:

    On some years or finishes, according to the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will explain them now:

    • Put your Lincoln MKZ on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be mindful with the plastic staples which can be delicate.
    • Remove your headlight block and change the front turn indicator bulb of your Lincoln MKZ following the steps seen in the parts seen earlier.
    • Put the whole thing back together again.

    If you want more tutorials on the Lincoln MKZ, go to our Lincoln MKZ category.