Whether for your own security, for roadworthiness testing or to avoid a fine, by ensuring your turn signal bulbs are always operational is very important. Indeed, bulbs are wearing parts that will predictably burn out as time passes and therefore need to be swapped out. You’re most likely in this article because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Lexus RX, we’ve made this article to help you do it alone and not have to go to your auto technician. In a first section, we will examine controling a burnt-out front turn signal bulb on your Lexus RX and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-lexus-rx

How to recognise if the front turn signal bulb on your Lexus RX is burnt out or needs to be replaced?

When you drive your motor vehicle you don’t always have the possibility to verify all the security features of your Lexus RX. Indeed, you are often times in a rush and tend to get into your motor vehicle, make your journey and put it down right away without taking the time to do an occasional check-up. It is as a consequence relevant to take the time to sometimes verify the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Lexus RX, but that you didn’t realize it. Here are the two simple options to examine if a front turn signal is burnt out or if you need to swap it rather quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are functioning.
  • By hearing to the sound of your blinkers. Indeed, there is an audible signal on each car that alerts you of a front turn indicator bulb burnt out on your Lexus RX, you will notice that the time between each “click” is much shorter, this means that you will have to swap the front turn signal bulb or before. It’s up to you to verify and verify which one is burnt out by a visual examine as on the first process shown earlier mentioned.

You may have another bulb to swap, like the one of your low beam or your position lights, don’t hesitate to read our blog posts to help you to perform this replacement.

Changing the front turn signal bulb on your Lexus RX

Now let’s go to the most essential section of this article, how to change the front turn signal bulb of your Lexus RX? Please be aware that this procedure is uncomplicated, you will require to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Lexus RX. If it is a bulb on your rear turn signal, see our dedicated article. However, here are the details of the simple steps to stick to to be able to execute this action correctly dependant on the solution you desire to choose.

Change front turn signal bulb on your Lexus RX through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Lexus RX by the new one (make certain to verify if it’s an orange or transparent bulb).
  • Reassemble and test that the brand-new front turn signal bulb works.
  • Change the front turn signal bulb of your Lexus RX through the wheel arch:

    This solution is specially effective when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and take out the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same guidelines as on the part previously seen.

    Replace the front turn signal bulb of your Lexus RX through the bumper:

    On some years or finishes, depending on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will explain them right now:

    • Put your Lexus RX on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be mindful with the plastic staples which can be fragile.
    • Remove your headlight block and swap the front turn indicator bulb of your Lexus RX following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    To find more tips on the Lexus RX, take a look at the Lexus RX category.