It doesn’t matter if for your own safety, for roadworthiness testing or to avoid a fine, ensuring that your turn signal bulbs are always functioning is necessary. In reality, bulbs are wearing parts that will predictably burn out over the years and as a consequence need to be changed. You’re likely on this site because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Lexus NX, we’ve created this document to help you do it by yourself and not have to go to your repair shop. In a first section, we will examine the checking a burnt-out front turn signal bulb on your Lexus NX and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-lexus-nx

How to know if the front turn signal bulb on your Lexus NX is burnt out or needs to be swapped out?

When you drive your motor vehicle you don’t constantly have the opportunity to verify all the safety components of your Lexus NX. In reality, you are in general in a rush and tend to get into your motor vehicle, make your journey and put it down right away without taking the time to do an occasional check-up. It is consequently relevant to take the time to sometimes verify the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Lexus NX, but that you didn’t detect it. Here are the two simple options to check if a front turn signal is burnt out or if you need to replace it quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to check that they are operational.
  • By listening to the sound of your blinkers. In reality, there is an audible indicator on each car that informs you of a front turn indicator bulb burnt out on your Lexus NX, you will recognize that the time between each “click” is much shorter, this suggests that you will have to swap the front turn signal bulb or before. It’s up to you to verify and make sure which one is burnt out by a visual check as on the first technique shown above.

You may have another bulb to replace, like the one of your low beam or your position lights, don’t be reluctant to read our content articles to help you to carry out this substitution.

Replacing the front turn signal bulb on your Lexus NX

Now let’s go to the most significant section of this document, how to change the front turn signal bulb of your Lexus NX? Take note that this operation is really easy, you will require to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Lexus NX. If it is a bulb on your rear turn signal, see our dedicated document. Nevertheless, here are the details of the guidelines to stick to to be able to carry out this act efficiently dependant on the strategy you desire to adopt.

Change front turn signal bulb on your Lexus NX through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Lexus NX by the new one (ensure to verify if it’s an orange or transparent bulb).
  • Reassemble and test that the new front turn signal bulb functions.

    • Change the front turn signal bulb of your Lexus NX through the wheel arch:

    This process is specially practical when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take out the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Replace the front turn signal bulb of your Lexus NX through the bumper:

    On some years or finishes, according to the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will point them right now:

    • Put your Lexus NX on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be careful with the plastic staples which can be vulnerable.
    • Take off your headlight block and replace the front turn indicator bulb of your Lexus NX following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    To discover more tips on the Lexus NX, take a look at the Lexus NX category.