Regardless whether for your own safety, for roadworthiness testing or to avoid a fine, being sure your turn signal bulbs are always functional is imperative. In fact, bulbs are wearing parts that will inevitably burn out after a while and consequently need to be swapped out. You’re quite likely on this website because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Land Rover Evoque, we’ve made this article to help you do it on your own and not have to go to your repair shop. In a first step, we will examine the checking a burnt-out front turn signal bulb on your Land Rover Evoque and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-land-rover-evoque

How to discover if the front turn signal bulb on your Land Rover Evoque is burnt out or needs to be swapped out?

When you drive your motor vehicle you don’t always have the possibility to check all the safety features of your Land Rover Evoque. In fact, you are often times in a rush and tend to enter into your motor vehicle, make your journey and put it down right away without taking the time to do an regular check-up. It is therefore relevant to take the time to sometimes check the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Land Rover Evoque, but that you didn’t realize it. Here are the two simple ways to check if a front turn signal is burnt out or if you need to replace it fairly quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to check that they are operational.
  • By hearing to the sound of your blinkers. In fact, there is an audible sign on each car that alerts you of a front turn indicator bulb burnt out on your Land Rover Evoque, you will recognize that the time between each “click” is much shorter, this denotes that you will have to swap the front turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first technique shown above.

You may have another bulb to replace, like the one of your low beam or your position lights, don’t hesitate to browse our blog posts to help you to achieve this substitution.

Changing the front turn signal bulb on your Land Rover Evoque

Now let’s go to the most important step of this article, how to change the front turn signal bulb of your Land Rover Evoque? Please be aware that this technique is fairly simple, you will require to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Land Rover Evoque. If it is a bulb on your rear turn signal, see our specific article. On the other hand, here are the details of the guidelines to follow in order to perform this action properly dependant on the strategy you desire to adopt.

Replace front turn signal bulb on your Land Rover Evoque through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Land Rover Evoque by the new one (make certain to check if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb operates.

    • Replace the front turn signal bulb of your Land Rover Evoque through the wheel arch:

    This tactic is particularly valuable when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same basic steps as on the part previously seen.

    Change the front turn signal bulb of your Land Rover Evoque through the bumper:

    On some years or finishes, depending on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will point them now:

    • Put your Land Rover Evoque on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be vulnerable.
    • Take out your headlight block and replace the front turn indicator bulb of your Land Rover Evoque following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    If you want more tutorials on the Land Rover Evoque, go to our Land Rover Evoque category.