It doesn’t matter if for your own security, for roadworthiness testing or to avoid a fine, ensuring your turn signal bulbs are always functional is imperative. In fact, bulbs are wearing parts that will surely burn out over the years and as a result need to be changed. You’re likely here because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Land Rover Discovery, we’ve written this article content to help you do it all on your own and not have to go to your mechanic. In a first section, we will look at controling a burnt-out front turn signal bulb on your Land Rover Discovery and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-land-rover-discovery

How to recognize if the front turn signal bulb on your Land Rover Discovery is burnt out or needs to be replaced?

When you drive your vehicle you don’t constantly have the possibility to check all the security equipments of your Land Rover Discovery. In fact, you are nearly always in a hurry and tend to enter into your vehicle, make your trip and put it down immediately without taking the time to do an periodic check-up. It is as a result relevant to take the time to occasionally check the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Land Rover Discovery, but that you didn’t detect it. Here are the two simple options to verify if a front turn signal is burnt out or if you need to replace it fairly quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to verify that they are working.
  • By listening to the sound of your blinkers. In fact, there is an audible indicator on each car that warns you of a front turn indicator bulb burnt out on your Land Rover Discovery, you will recognize that the time between each “click” is much shorter, this means that you will have to replace the front turn signal bulb or before. It’s up to you to check and check which one is burnt out by a visual verify as on the first solution shown earlier mentioned.

You may have an additional bulb to replace, like the one of your low beam or your position lights, don’t hesitate to read our articles to help you to conduct this replacement.

Replacing the front turn signal bulb on your Land Rover Discovery

Now let’s go to the most significant section of this article content, how to change the front turn signal bulb of your Land Rover Discovery? Please be aware that this technique is really easy, you will require to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Land Rover Discovery. If it is a bulb on your rear turn signal, see our dedicated article content. However, here are the details of the simple steps to follow in order to carry out this act correctly depending on the solution you wish to adopt.

Change front turn signal bulb on your Land Rover Discovery through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Land Rover Discovery by the new one (make certain to check if it’s an orange or transparent bulb).
  • Reassemble and test that the brand-new front turn signal bulb is effective.
  • Change the front turn signal bulb of your Land Rover Discovery through the wheel arch:

    This procedure is specifically valuable when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take out the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same guidelines as on the part previously seen.

    Replace the front turn signal bulb of your Land Rover Discovery through the bumper:

    On some years or finishes, based on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will detail them right now:

    • Put your Land Rover Discovery on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be careful with the plastic staples which can be breakable.
    • Take away your headlight block and replace the front turn indicator bulb of your Land Rover Discovery following the steps seen in the parts seen earlier.
    • Put the whole thing back together again.

    If you wish more tutorials on the Land Rover Discovery, go to our Land Rover Discovery category.