It doesn’t matter if for your personal safety, for roadworthiness testing or to avoid a fine, by ensuring your turn signal bulbs are always operational is necessary. In reality, bulbs are wearing parts that will definitely burn out over the years and therefore need to be swapped out. You’re almost certainly on this site because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Jeep Wrangler, we’ve written and published this article content to help you do it without hiring somebody and not have to go to your auto mechanic. In a first step, we will take a look at controling a burnt-out front turn signal bulb on your Jeep Wrangler and in a second step, how to change the front turn signal bulb on your car..
How to know if the front turn signal bulb on your Jeep Wrangler is burnt out or needs to be changed?
When you drive your automobile you don’t constantly have the opportunity to examine all the safety equipments of your Jeep Wrangler. In reality, you are in general in a hurry and tend to get into your automobile, make your trip and put it down right away without taking the time to do an regular check-up. It is consequently relevant to take the time to in some cases examine the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Jeep Wrangler, but that you didn’t detect it. Here are the two simple techniques to verify if a front turn signal is burnt out or if you need to change it rather quickly:
- When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to verify that they are functional.
- By hearing to the sound of your blinkers. In reality, there is an audible sign on each car that alerts you of a front turn indicator bulb burnt out on your Jeep Wrangler, you will recognize that the time between each “click” is much closer, this denotes that you will have to change the front turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual verify as on the first process shown previously.
You may have an additional bulb to change, like the one of your low beam or your position lights, don’t be reluctant to browse our blog posts to help you to do this replacing.
Changing the front turn signal bulb on your Jeep Wrangler
Now let’s go to the most essential step of this article content, how to change the front turn signal bulb of your Jeep Wrangler? Please be aware that this operation is fairly simple, you will have to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Jeep Wrangler. If it is a bulb on your rear turn signal, see our dedicated article content. Nevertheless, here are the details of the simple steps to follow in order to accomplish this action correctly according to the technique you wish to adopt.
Replace front turn signal bulb on your Jeep Wrangler through the bonnet:
- Open your bonnet and clear access to your headlight pods.
- Use a torx tip to open the headlight unit on your car
- Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
- Replace the front flasher bulb of your Jeep Wrangler by the new one (make sure to examine if it’s an orange or transparent bulb).
- Reassemble and test that the brand-new front turn signal bulb works.
- Lift your car, and remove the front wheel on the side you want to operate on.
- Take out your wheel arch with a torx bit.
- Go to your headlamp block and change the front turn signal bulb on your car following the same steps as on the part previously seen.
- Put your Jeep Wrangler on a jack or a candle.
- Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be mindful with the plastic staples which can be breakable.
- Take out your headlight block and change the front turn indicator bulb of your Jeep Wrangler following the steps seen in the parts seen above.
- Put the whole thing back together again.
Replace the front turn signal bulb of your Jeep Wrangler through the wheel arch:
This procedure is extremely useful when you don’t have enough space in the bonnet to access the front turn signal on your car:
Replace the front turn signal bulb of your Jeep Wrangler through the bumper:
On some years or finishes, according to the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will detail them right now:
If perhaps you have any additional questions about the Jeep Wrangler, do not hesitate to consult our Jeep Wrangler category.