Regardless for your own safety, for roadworthiness testing or to avoid a fine, being sure your turn signal bulbs are always operational is very important. In fact, bulbs are wearing parts that will predictably burn out after awhile and as a consequence need to be changed. You’re probably on this website because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your hyundai i20, we’ve created this article to help you do it alone and not have to go to your mechanic. In a first section, we will examine controling a burnt-out front turn signal bulb on your hyundai i20 and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-hyundai-i20

How to find out if the front turn signal bulb on your hyundai i20 is burnt out or needs to be swapped out?

When you drive your vehicle you don’t always have the possibility to examine all the safety features of your hyundai i20. In fact, you are mostly in a hurry and tend to get into your vehicle, make your trip and put it down instantly without taking the time to do an occasional check-up. It is consequently important to take the time to occasionally examine the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your hyundai i20, but that you didn’t detect it. Here are the two simple ways to examine if a front turn signal is burnt out or if you need to change it rather quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are functioning.
  • By listening to the sound of your blinkers. In fact, there is an audible signal on each car that informs you of a front turn indicator bulb burnt out on your hyundai i20, you will recognize that the time between each “click” is much shorter, this denotes that you will have to replace the front turn signal bulb or before. It’s up to you to examine and check which one is burnt out by a visual examine as on the first methodology shown previously.

You may have another bulb to change, like the one of your low beam or your position lights, don’t hesitate to read our content articles to help you to carry out this replacing.

Changing the front turn signal bulb on your hyundai i20

Now let’s go to the most essential section of this article, how to change the front turn signal bulb of your hyundai i20? You should be aware that this process is really easy, you will require to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your hyundai i20. If it is a bulb on your rear turn signal, see our dedicated article. However, here are the details of the actions to stick to to be able to accomplish this action efficiently according to the method you wish to choose.

Replace front turn signal bulb on your hyundai i20 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your hyundai i20 by the new one (be sure to examine if it’s an orange or transparent bulb).
  • Reassemble and check that the new front turn signal bulb works.

    • Replace the front turn signal bulb of your hyundai i20 through the wheel arch:

    This technique is specially practical when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and take off the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same simple steps as on the part previously seen.

    Replace the front turn signal bulb of your hyundai i20 through the bumper:

    On some years or finishes, according to the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will detail them right now:

    • Put your hyundai i20 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be careful with the plastic staples which can be fragile.
    • Take out your headlight block and change the front turn indicator bulb of your hyundai i20 following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    To get more tips on the hyundai i20, take a look at the hyundai i20 category.