Whether for your own security, for roadworthiness testing or to avoid a fine, making sure your turn signal bulbs are always functional is extremely important. Indeed, bulbs are wearing parts that will obviously burn out over time and as a result need to be swapped out. You’re most certainly on the website because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your hyundai i10, we’ve created this document to help you do it by yourself and not have to go to your auto mechanic. In a first section, we will look at the checking a burnt-out front turn signal bulb on your hyundai i10 and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-hyundai-i10

How to find out if the front turn signal bulb on your hyundai i10 is burnt out or needs to be swapped out?

When you drive your car you don’t constantly have the possibility to verify all the security equipments of your hyundai i10. Indeed, you are in general in a hurry and tend to enter into your car, make your journey and put it down instantly without taking the time to do an regular check-up. It is as a result essential to take the time to occasionally verify the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your hyundai i10, but that you didn’t become aware of it. Here are the two simple solutions to control if a front turn signal is burnt out or if you need to swap it fairly quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to control that they are working.
  • By listening to the sound of your blinkers. Indeed, there is an audible signal on each car that signals you of a front turn indicator bulb burnt out on your hyundai i10, you will perceive that the time between each “click” is much shorter, this suggests that you will have to swap the front turn signal bulb or before. It’s up to you to verify and check out which one is burnt out by a visual control as on the first methodology shown earlier mentioned.

You may have another bulb to swap, like the one of your low beam or your position lights, don’t hesitate to read our content articles to help you to complete this substitution.

Replacing the front turn signal bulb on your hyundai i10

Now let’s go to the most significant section of this document, how to change the front turn signal bulb of your hyundai i10? Take note that this task is fairly simple, you will need to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your hyundai i10. If it is a bulb on your rear turn signal, see our special document. Nevertheless, here are the details of the steps to follow to be able to conduct this action properly according to the method you desire to adopt.

Change front turn signal bulb on your hyundai i10 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your hyundai i10 by the new one (make certain to verify if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb is effective.
  • Change the front turn signal bulb of your hyundai i10 through the wheel arch:

    This tactic is extremely practical when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and take out the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same basic steps as on the part previously seen.

    Replace the front turn signal bulb of your hyundai i10 through the bumper:

    On some years or finishes, depending on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will describe them right now:

    • Put your hyundai i10 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be breakable.
    • Remove your headlight block and swap the front turn indicator bulb of your hyundai i10 following the steps seen in the parts seen earlier.
    • Put the whole thing back together again.

    If you need more tutorials on the hyundai i10, go to our hyundai i10 category.