Regardless whether for your own safety, for roadworthiness testing or to avoid a fine, by ensuring your turn signal bulbs are always operational is necessary. In reality, bulbs are wearing parts that will surely burn out as time passes and therefore need to be swapped out. You’re almost certainly on this website because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Ford S-max, we’ve made this content to help you do it on your own and not have to go to your auto mechanic. In a first section, we will have a look at controling a burnt-out front turn signal bulb on your Ford S-max and in a second section, how to change the front turn signal bulb on your car..
How to recognise if the front turn signal bulb on your Ford S-max is burnt out or needs to be replaced?
When you drive your car you don’t constantly have the possibility to verify all the safety features of your Ford S-max. In reality, you are frequently in a hurry and tend to enter into your car, make your trip and put it down instantly without taking the time to do an occasional check-up. It is as a consequence crucial to take the time to once in a while verify the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Ford S-max, but that you didn’t become aware of it. Here are the two simple options to check if a front turn signal is burnt out or if you need to replace it quickly:
- When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to check that they are operational.
- By hearing to the sound of your blinkers. In reality, there is an audible indicator on each car that informs you of a front turn indicator bulb burnt out on your Ford S-max, you will notice that the time between each “click” is much shorter, this means that you will have to change the front turn signal bulb or before. It’s up to you to verify and make sure which one is burnt out by a visual check as on the first technique shown above.
You may have an additional bulb to replace, like the one of your low beam or your position lights, don’t be reluctant to browse our blog posts to help you to carry out this substitution.
Changing the front turn signal bulb on your Ford S-max
Now let’s go to the most important section of this content, how to replace the front turn signal bulb of your Ford S-max? Please note that this operation is uncomplicated, you will have to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Ford S-max. If it is a bulb on your rear turn signal, see our special content. Nevertheless, here are the details of the guidelines to stick to in order to perform this action properly according to the method you wish to adopt.
Change front turn signal bulb on your Ford S-max through the bonnet:
- Open your bonnet and clear access to your headlight pods.
- Use a torx tip to open the headlight unit on your car
- Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
- Replace the front flasher bulb of your Ford S-max by the new one (be sure to verify if it’s an orange or transparent bulb).
- Reassemble and check that the brand-new front turn signal bulb functions.
- Lift your car, and take off the front wheel on the side you want to operate on.
- Take out your wheel arch with a torx bit.
- Go to your headlamp block and replace the front turn signal bulb on your car following the same guidelines as on the part previously seen.
- Put your Ford S-max on a jack or a candle.
- Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be breakable.
- Take out your headlight block and replace the front turn indicator bulb of your Ford S-max following the steps seen in the parts seen previously.
- Put the whole thing back together again.
Change the front turn signal bulb of your Ford S-max through the wheel arch:
This tactic is especially effective when you don’t have enough space in the bonnet to access the front turn signal on your car:
Change the front turn signal bulb of your Ford S-max through the bumper:
On some years or finishes, based on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will detail them right now:
To get more tips on the Ford S-max, take a look at the Ford S-max category.