Regardless for your personal safety, for roadworthiness testing or to avoid a fine, being sure your turn signal bulbs are always operational is necessary. In fact, bulbs are wearing parts that will definitely burn out over time and as a result need to be replaced. You’re most likely on the website because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Ford S-max 2, we’ve created this article content to help you do it all on your own and not have to go to your auto mechanic. In a first section, we will examine the checking a burnt-out front turn signal bulb on your Ford S-max 2 and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-ford-s-max-2

How to recognize if the front turn signal bulb on your Ford S-max 2 is burnt out or needs to be replaced?

When you drive your vehicle you don’t constantly have the opportunity to examine all the safety features of your Ford S-max 2. In fact, you are in many cases in a hurry and tend to enter into your vehicle, make your journey and put it down right away without taking the time to do an periodic check-up. It is as a result fundamental to take the time to occasionally examine the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Ford S-max 2, but that you didn’t become aware of it. Here are the two simple techniques to control if a front turn signal is burnt out or if you need to change it fairly quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to control that they are operational.
  • By hearing to the sound of your blinkers. In fact, there is an audible indication on each car that warns you of a front turn indicator bulb burnt out on your Ford S-max 2, you will notice that the time between each “click” is much closer, this suggests that you will have to swap the front turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual control as on the first methodology shown previously.

You may have an additional bulb to change, like the one of your low beam or your position lights, don’t be reluctant to browse our blog posts to help you to do this replacement.

Changing the front turn signal bulb on your Ford S-max 2

Now let’s go to the most important section of this article content, how to change the front turn signal bulb of your Ford S-max 2? Please be aware that this technique is very simple, you will need to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Ford S-max 2. If it is a bulb on your rear turn signal, see our special article content. Nevertheless, here are the details of the steps to follow to be able to conduct this act properly dependant on the approach you want to adopt.

Replace front turn signal bulb on your Ford S-max 2 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Ford S-max 2 by the new one (ensure to examine if it’s an orange or transparent bulb).
  • Reassemble and test that the new front turn signal bulb operates.
  • Replace the front turn signal bulb of your Ford S-max 2 through the wheel arch:

    This technique is extremely effective when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same steps as on the part previously seen.

    Change the front turn signal bulb of your Ford S-max 2 through the bumper:

    On some years or finishes, based on the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will explain them now:

    • Put your Ford S-max 2 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Beware with the plastic staples which can be delicate.
    • Take away your headlight block and change the front turn indicator bulb of your Ford S-max 2 following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    To discover more tips on the Ford S-max 2, take a look at the Ford S-max 2 category.