Whether for your personal security, for roadworthiness testing or to avoid a fine, ensuring that your turn signal bulbs are always operational is important. In reality, bulbs are wearing parts that will surely burn out after awhile and as a consequence need to be replaced. You’re almost certainly on this site because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Ford Fiesta 4, we’ve made this content to help you do it all on your own and not have to go to your technician. In a first part, we will look at controling a burnt-out front turn signal bulb on your Ford Fiesta 4 and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-ford-fiesta-4

How to recognise if the front turn signal bulb on your Ford Fiesta 4 is burnt out or needs to be replaced?

When you drive your automobile you don’t constantly have the opportunity to check all the security equipments of your Ford Fiesta 4. In reality, you are frequently in a hurry and tend to get into your automobile, make your trip and put it down immediately without taking the time to do an occasional check-up. It is as a result relevant to take the time to once in a while check the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Ford Fiesta 4, but that you didn’t detect it. Here are the two simple ways to check if a front turn signal is burnt out or if you need to swap it quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to check that they are functional.
  • By listening to the sound of your blinkers. In reality, there is an audible signal on each car that informs you of a front turn indicator bulb burnt out on your Ford Fiesta 4, you will identify that the time between each “click” is much shorter, this denotes that you will have to change the front turn signal bulb or before. It’s up to you to check and check out which one is burnt out by a visual check as on the first procedure shown previously.

You may have another bulb to swap, like the one of your low beam or your position lights, don’t be reluctant to consult our articles to help you to perform this replacement.

Changing the front turn signal bulb on your Ford Fiesta 4

Now let’s go to the most essential part of this content, how to replace the front turn signal bulb of your Ford Fiesta 4? Please be aware that this procedure is quite simple, you will have to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Ford Fiesta 4. If it is a bulb on your rear turn signal, see our dedicated content. On the other hand, here are the details of the steps to stick to to be able to carry out this act properly according to the approach you wish to adopt.

Change front turn signal bulb on your Ford Fiesta 4 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Ford Fiesta 4 by the new one (make sure to check if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb works.

    • Change the front turn signal bulb of your Ford Fiesta 4 through the wheel arch:

    This methodology is specifically valuable when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and take away the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same steps as on the part previously seen.

    Replace the front turn signal bulb of your Ford Fiesta 4 through the bumper:

    On some years or finishes, dependant on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will describe them right now:

    • Put your Ford Fiesta 4 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be careful with the plastic staples which can be fragile.
    • Take off your headlight block and swap the front turn indicator bulb of your Ford Fiesta 4 following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    To get more tips on the Ford Fiesta 4, take a look at the Ford Fiesta 4 category.