Regardless whether for your personal safety, for roadworthiness testing or to avoid a fine, by ensuring your turn signal bulbs are always working is very important. In fact, bulbs are wearing parts that will undoubtedly burn out after awhile and therefore need to be swapped out. You’re most likely here because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Ford Explorer, we’ve created this article content to help you do it all on your own and not have to go to your repair shop. In a first part, we will examine controling a burnt-out front turn signal bulb on your Ford Explorer and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-ford-explorer

How to recognise if the front turn signal bulb on your Ford Explorer is burnt out or needs to be changed?

When you drive your motor vehicle you don’t always have the possibility to examine all the safety components of your Ford Explorer. In fact, you are often in a rush and tend to enter into your motor vehicle, make your journey and put it down immediately without taking the time to do an unexpected check-up. It is as a consequence fundamental to take the time to sometimes examine the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Ford Explorer, but that you didn’t detect it. Here are the two simple options to examine if a front turn signal is burnt out or if you need to replace it rather quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are working.
  • By listening to the sound of your blinkers. In fact, there is an audible signal on each car that informs you of a front turn indicator bulb burnt out on your Ford Explorer, you will recognise that the time between each “click” is much closer, this suggests that you will have to replace the front turn signal bulb or before. It’s up to you to examine and make sure which one is burnt out by a visual examine as on the first procedure shown above.

You may have an additional bulb to replace, like the one of your low beam or your position lights, don’t hesitate to browse our blog posts to help you to complete this replacement.

Changing the front turn signal bulb on your Ford Explorer

Now let’s go to the most significant part of this article content, how to change the front turn signal bulb of your Ford Explorer? Please note that this operation is quite simple, you will have to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Ford Explorer. If it is a bulb on your rear turn signal, see our specific article content. Nevertheless, here are the details of the steps to stick to to be able to perform this action correctly dependant on the technique you want to choose.

Change front turn signal bulb on your Ford Explorer through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Ford Explorer by the new one (make sure to examine if it’s an orange or transparent bulb).
  • Reassemble and test that the new front turn signal bulb functions.

    • Change the front turn signal bulb of your Ford Explorer through the wheel arch:

    This approach is extremely useful when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take off the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Change the front turn signal bulb of your Ford Explorer through the bumper:

    On some years or finishes, based on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will detail them right now:

    • Put your Ford Explorer on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be breakable.
    • Take away your headlight block and replace the front turn indicator bulb of your Ford Explorer following the steps seen in the parts seen earlier.
    • Put the whole thing back together again.

    Whenever you have any further questions about the Ford Explorer, do not hesitate to consult our Ford Explorer category.