Regardless whether for your personal safety, for roadworthiness testing or to avoid a fine, by ensuring your turn signal bulbs are always functioning is important. In reality, bulbs are wearing parts that will predictably burn out over the years and as a result need to be swapped out. You’re probably on this site because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Ford C-max 2, we’ve made this content page to help you do it alone and independently and not have to go to your technician. In a first step, we will examine controling a burnt-out front turn signal bulb on your Ford C-max 2 and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-ford-c-max-2

How to discover if the front turn signal bulb on your Ford C-max 2 is burnt out or needs to be replaced?

When you drive your vehicle you don’t constantly have the opportunity to examine all the safety equipments of your Ford C-max 2. In reality, you are most of the time in a rush and tend to enter into your vehicle, make your trip and put it down right away without taking the time to do an occasional check-up. It is therefore relevant to take the time to in some cases examine the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Ford C-max 2, but that you didn’t realize it. Here are the two simple solutions to check if a front turn signal is burnt out or if you need to change it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to check that they are working.
  • By listening to the sound of your blinkers. In reality, there is an audible signal on each car that warns you of a front turn indicator bulb burnt out on your Ford C-max 2, you will recognise that the time between each “click” is much shorter, this means that you will have to change the front turn signal bulb or before. It’s up to you to examine and check which one is burnt out by a visual check as on the first process shown above.

You may have another bulb to change, like the one of your low beam or your position lights, don’t be reluctant to browse our blog posts to help you to complete this replacement.

Replacing the front turn signal bulb on your Ford C-max 2

Now let’s go to the main step of this content page, how to replace the front turn signal bulb of your Ford C-max 2? You should be aware that this operation is very simple, you will require to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Ford C-max 2. If it is a bulb on your rear turn signal, see our special content page. Nevertheless, here are the details of the simple steps to stick to in order to execute this action properly depending on the strategy you want to adopt.

Replace front turn signal bulb on your Ford C-max 2 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Ford C-max 2 by the new one (ensure to examine if it’s an orange or transparent bulb).
  • Reassemble and test that the new front turn signal bulb functions.

    • Replace the front turn signal bulb of your Ford C-max 2 through the wheel arch:

    This approach is specifically effective when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and take out the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Replace the front turn signal bulb of your Ford C-max 2 through the bumper:

    On some years or finishes, depending on the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will point them now:

    • Put your Ford C-max 2 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be careful with the plastic staples which can be delicate.
    • Take away your headlight block and change the front turn indicator bulb of your Ford C-max 2 following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    If you have any additional questions about the Ford C-max 2, do not hesitate to consult our Ford C-max 2 category.