It doesn’t matter if for your personal safety, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are always working is necessary. In reality, bulbs are wearing parts that will inevitably burn out after some time and as a result need to be swapped out. You’re probably on the website because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Ford B-max, we’ve written this document to help you do it alone and independently and not have to go to your technician. In a first step, we will take a look at controling a burnt-out front turn signal bulb on your Ford B-max and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-ford-b-max

How to discover if the front turn signal bulb on your Ford B-max is burnt out or needs to be changed?

When you drive your motor vehicle you don’t constantly have the opportunity to verify all the safety features of your Ford B-max. In reality, you are frequently in a hurry and tend to enter into your motor vehicle, make your trip and put it down right away without taking the time to do an regular check-up. It is as a consequence essential to take the time to once in a while verify the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Ford B-max, but that you didn’t become aware of it. Here are the two simple ways to verify if a front turn signal is burnt out or if you need to change it quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to verify that they are operational.
  • By hearing to the sound of your blinkers. In reality, there is an audible indication on each car that alerts you of a front turn indicator bulb burnt out on your Ford B-max, you will recognise that the time between each “click” is much shorter, this means that you will have to change the front turn signal bulb or before. It’s up to you to verify and examine which one is burnt out by a visual verify as on the first process shown earlier mentioned.

You may have another bulb to change, like the one of your low beam or your position lights, don’t hesitate to consult our articles to help you to achieve this replacing.

Replacing the front turn signal bulb on your Ford B-max

Now let’s go to the main step of this document, how to replace the front turn signal bulb of your Ford B-max? Please be aware that this operation is quite easy, you will need to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Ford B-max. If it is a bulb on your rear turn signal, see our specific document. Nevertheless, here are the details of the guidelines to stick to to be able to perform this action accurately according to the approach you want to adopt.

Replace front turn signal bulb on your Ford B-max through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Ford B-max by the new one (ensure to verify if it’s an orange or transparent bulb).
  • Reassemble and test that the new front turn signal bulb works.

    • Replace the front turn signal bulb of your Ford B-max through the wheel arch:

    This solution is particularly useful when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and take away the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same simple steps as on the part previously seen.

    Replace the front turn signal bulb of your Ford B-max through the bumper:

    On some years or finishes, dependant on the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will point them now:

    • Put your Ford B-max on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be careful with the plastic staples which can be fragile.
    • Take away your headlight block and change the front turn indicator bulb of your Ford B-max following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    If you need more tutorials on the Ford B-max, go to our Ford B-max category.