Regardless whether for your personal safety, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are always functional is extremely important. In fact, bulbs are wearing parts that will obviously burn out after awhile and as a result need to be swapped out. You’re most likely on this site because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Fiat Stilo, we’ve written this article content to help you do it alone and not have to go to your technician. In a first part, we will examine the checking a burnt-out front turn signal bulb on your Fiat Stilo and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-fiat-stilo

How to find out if the front turn signal bulb on your Fiat Stilo is burnt out or needs to be replaced?

When you drive your vehicle you don’t constantly have the opportunity to check all the safety components of your Fiat Stilo. In fact, you are most of the time in a rush and tend to enter into your vehicle, make your journey and put it down immediately without taking the time to do an unexpected check-up. It is as a consequence fundamental to take the time to occasionally check the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Fiat Stilo, but that you didn’t realize it. Here are the two simple methods to check if a front turn signal is burnt out or if you need to change it rather quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to check that they are operational.
  • By hearing to the sound of your blinkers. In fact, there is an audible signal on each car that warns you of a front turn indicator bulb burnt out on your Fiat Stilo, you will identify that the time between each “click” is much closer, this denotes that you will have to swap the front turn signal bulb or before. It’s up to you to check and check out which one is burnt out by a visual check as on the first technique shown previously.

You may have another bulb to change, like the one of your low beam or your position lights, don’t be reluctant to browse our articles to help you to conduct this substitution.

Replacing the front turn signal bulb on your Fiat Stilo

Now let’s go to the most significant part of this article content, how to change the front turn signal bulb of your Fiat Stilo? Please note that this process is quite easy, you will require to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Fiat Stilo. If it is a bulb on your rear turn signal, see our specific article content. However, here are the details of the steps to stick to in order to accomplish this action properly depending on the method you wish to adopt.

Replace front turn signal bulb on your Fiat Stilo through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Fiat Stilo by the new one (ensure to check if it’s an orange or transparent bulb).
  • Reassemble and check that the new front turn signal bulb works.
  • Replace the front turn signal bulb of your Fiat Stilo through the wheel arch:

    This procedure is particularly practical when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and take away the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same steps as on the part previously seen.

    Change the front turn signal bulb of your Fiat Stilo through the bumper:

    On some years or finishes, based on the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will point them now:

    • Put your Fiat Stilo on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Beware with the plastic staples which can be vulnerable.
    • Take away your headlight block and change the front turn indicator bulb of your Fiat Stilo following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    If you need more tutorials on the Fiat Stilo, go to our Fiat Stilo category.