Regardless whether for your own security, for roadworthiness testing or to avoid a fine, by ensuring your turn signal bulbs are always working is imperative. In fact, bulbs are wearing parts that will obviously burn out after awhile and as a result need to be replaced. You’re likely in this article because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Fiat Punto 2, we’ve made this article content to help you do it on your own and not have to go to your technician. In a first part, we will look at the checking a burnt-out front turn signal bulb on your Fiat Punto 2 and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-fiat-punto-2

How to recognise if the front turn signal bulb on your Fiat Punto 2 is burnt out or needs to be swapped out?

When you drive your vehicle you don’t constantly have the possibility to examine all the security equipments of your Fiat Punto 2. In fact, you are often in a hurry and tend to enter into your vehicle, make your journey and put it down immediately without taking the time to do an periodic check-up. It is as a consequence essential to take the time to in some cases examine the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Fiat Punto 2, but that you didn’t notice it. Here are the two simple solutions to verify if a front turn signal is burnt out or if you need to swap it fairly quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to verify that they are functioning.
  • By listening to the sound of your blinkers. In fact, there is an audible signal on each car that alerts you of a front turn indicator bulb burnt out on your Fiat Punto 2, you will find out that the time between each “click” is much shorter, this means that you will have to change the front turn signal bulb or before. It’s up to you to examine and make sure which one is burnt out by a visual verify as on the first solution shown earlier mentioned.

You may have another bulb to swap, like the one of your low beam or your position lights, don’t be reluctant to browse our content articles to help you to do this substitution.

Replacing the front turn signal bulb on your Fiat Punto 2

Now let’s go to the main part of this article content, how to change the front turn signal bulb of your Fiat Punto 2? You should be aware that this procedure is really easy, you will have to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Fiat Punto 2. If it is a bulb on your rear turn signal, see our specific article content. On the other hand, here are the details of the actions to stick to in order to execute this act efficiently dependant on the approach you wish to adopt.

Change front turn signal bulb on your Fiat Punto 2 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Fiat Punto 2 by the new one (make sure to examine if it’s an orange or transparent bulb).
  • Reassemble and test that the new front turn signal bulb is effective.

    • Change the front turn signal bulb of your Fiat Punto 2 through the wheel arch:

    This approach is in particular effective when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same steps as on the part previously seen.

    Change the front turn signal bulb of your Fiat Punto 2 through the bumper:

    On some years or finishes, according to the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will point them right now:

    • Put your Fiat Punto 2 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Beware with the plastic staples which can be vulnerable.
    • Take off your headlight block and swap the front turn indicator bulb of your Fiat Punto 2 following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    To discover more tips on the Fiat Punto 2, take a look at the Fiat Punto 2 category.