It doesn’t matter if for your own safety, for roadworthiness testing or to avoid a fine, ensuring your turn signal bulbs are always functioning is important. In fact, bulbs are wearing parts that will surely burn out over the years and as a consequence need to be replaced. You’re likely in this article because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Fiat Panda, we’ve made this content page to help you do it all on your own and not have to go to your technician. In a first part, we will take a look at controling a burnt-out front turn signal bulb on your Fiat Panda and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-fiat-panda

How to discover if the front turn signal bulb on your Fiat Panda is burnt out or needs to be swapped out?

When you drive your car you don’t always have the opportunity to check all the safety equipments of your Fiat Panda. In fact, you are often times in a hurry and tend to enter into your car, make your trip and put it down immediately without taking the time to do an occasional check-up. It is therefore essential to take the time to once in a while check the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Fiat Panda, but that you didn’t notice it. Here are the two simple solutions to verify if a front turn signal is burnt out or if you need to swap it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to verify that they are operational.
  • By hearing to the sound of your blinkers. In fact, there is an audible sign on each car that informs you of a front turn indicator bulb burnt out on your Fiat Panda, you will recognise that the time between each “click” is much shorter, this suggests that you will have to swap the front turn signal bulb or before. It’s up to you to check and examine which one is burnt out by a visual verify as on the first solution shown above.

You may have an additional bulb to swap, like the one of your low beam or your position lights, don’t be reluctant to browse our content articles to help you to accomplish this substitution.

Changing the front turn signal bulb on your Fiat Panda

Now let’s go to the most essential part of this content page, how to replace the front turn signal bulb of your Fiat Panda? You should be aware that this procedure is uncomplicated, you will require to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Fiat Panda. If it is a bulb on your rear turn signal, see our dedicated content page. On the other hand, here are the details of the steps to stick to to be able to accomplish this action efficiently depending on the method you wish to adopt.

Replace front turn signal bulb on your Fiat Panda through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Fiat Panda by the new one (ensure to check if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb works.

    • Replace the front turn signal bulb of your Fiat Panda through the wheel arch:

    This tactic is in particular practical when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take off the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same steps as on the part previously seen.

    Change the front turn signal bulb of your Fiat Panda through the bumper:

    On some years or finishes, based on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will point them now:

    • Put your Fiat Panda on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be delicate.
    • Take out your headlight block and swap the front turn indicator bulb of your Fiat Panda following the steps seen in the parts seen earlier.
    • Put the whole thing back together again.

    In the event that you have any further questions about the Fiat Panda, do not hesitate to consult our Fiat Panda category.