It doesn’t matter if for your own security, for roadworthiness testing or to avoid a fine, making sure your turn signal bulbs are always working is very important. In reality, bulbs are wearing parts that will surely burn out in the future and therefore need to be swapped out. You’re likely on this website because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Ds Ds 3 Crossback, we’ve made this content page to help you do it all on your own and not have to go to your auto mechanic. In a first part, we will look at controling a burnt-out front turn signal bulb on your Ds Ds 3 Crossback and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-ds-ds3-crossback

How to find out if the front turn signal bulb on your Ds Ds 3 Crossback is burnt out or needs to be changed?

When you drive your automobile you don’t always have the possibility to check all the security equipments of your Ds Ds 3 Crossback. In reality, you are most of the time in a rush and tend to get into your automobile, make your journey and put it down immediately without taking the time to do an unexpected check-up. It is as a result crucial to take the time to once in a while check the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Ds Ds 3 Crossback, but that you didn’t realize it. Here are the two simple methods to verify if a front turn signal is burnt out or if you need to swap it rather quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to verify that they are functional.
  • By listening to the sound of your blinkers. In reality, there is an audible indicator on each car that alerts you of a front turn indicator bulb burnt out on your Ds Ds 3 Crossback, you will notice that the time between each “click” is much shorter, this denotes that you will have to swap the front turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual verify as on the first solution shown above.

You may have an additional bulb to swap, like the one of your low beam or your position lights, don’t be reluctant to browse our blog posts to help you to do this replacing.

Changing the front turn signal bulb on your Ds Ds 3 Crossback

Now let’s go to the main part of this content page, how to change the front turn signal bulb of your Ds Ds 3 Crossback? Please note that this technique is quite easy, you will require to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Ds Ds 3 Crossback. If it is a bulb on your rear turn signal, see our special content page. On the other hand, here are the details of the simple steps to stick to in order to perform this act accurately dependant on the method you wish to adopt.

Change front turn signal bulb on your Ds Ds 3 Crossback through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Ds Ds 3 Crossback by the new one (make sure to check if it’s an orange or transparent bulb).
  • Reassemble and test that the brand-new front turn signal bulb works.
  • Change the front turn signal bulb of your Ds Ds 3 Crossback through the wheel arch:

    This methodology is especially useful when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and take off the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same guidelines as on the part previously seen.

    Replace the front turn signal bulb of your Ds Ds 3 Crossback through the bumper:

    On some years or finishes, depending on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will describe them now:

    • Put your Ds Ds 3 Crossback on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be careful with the plastic staples which can be vulnerable.
    • Take off your headlight block and swap the front turn indicator bulb of your Ds Ds 3 Crossback following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    If you need more guides on the Ds Ds 3 Crossback, go to our Ds Ds 3 Crossback category.